4 reviewing panic snapshots, 4 reviewing panic snapshots -14, Reviewing panic snapshots – Motorola Series Switch WS5100 User Manual
Page 350
8-14 WS5100 Series Switch System Reference Guide
2. Select a target file, and select the
Transfer Files
button.
3. Use the
From
drop-down menu to specify the location from which the log file is sent.
If only the applet is available as a transfer location, use the default switch option.
4. Select a target file for the file transfer from the
File
drop-down menu.
The drop-down menu contains the core files listed within the File-Mgmt screen.
5. Use the
To
drop-down menu (within the Target field) to define whether the target log file is to be sent to
the system's local disk (Local Disk) or to an external server (Server).
6. Provide the name of the file to be transferred to the location specified within the
File
field.
7. If Server has been selected as the source, use the
Using
drop down-menu to configure whether the log
file transfer will be sent using FTP or TFTP.
8. If Server has been selected as the source, enter the
IP Address
of destination server or system receiving
the target log file.
9. If Server has been selected as the source, enter the
User ID
credentials required to send the file to the
target location. Use the user ID for FTP transfers only.
10.If Server has been selected as the source, enter the
Password
required to send the file to the target
location using FTP.
11.Specify the appropriate
Path
name to the target directory on the local system disk or server as
configured using the "To" parameter. If the local disk option is selected, use the browse button to specify
the location on the local disk.
12.Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
13.Click the
Transfer
button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired log file to the specified location.
14.Click the
Close
button to exit the screen after a transfer. There are no changes to save or apply.
8.4 Reviewing Panic Snapshots
Refer to the
Panic Snapshots
screen for an overview of the panic files available. Typically, panic files refer
to switch events interpreted as critical conditions (and thus requiring prompt attention). Use the information
displayed within the screen you can make informed decisions whether a target file should be discarded or
transferred to a secure location for permanent archive.