Motorola Series Switch WS5100 - Manual (Page 322)

7-14 WS5100 Series Switch System Reference Guide
4. Select a threshold and click the Edit button to display a screen wherein threshold settings for the MU,
AP and WLAN can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for the MU,
AP or WLAN. Ensure the value set is realistic, in respect to number of MUs and APs supporting WLANs
within the switch managed network.
5. Use the Maximum Number of Packets to Send a Trap field (at the bottom of the screen) to enter a
value used as the minimum number of data packets required for a trap to be generated for a target event.
Ensure the value is realistic, as setting it to low could generate traps unnecessarily. Refer to
Wireless
Trap Threshold Values on page 7-15 for additional information.
6. Click the Apply button to save changes made to the screen since the last saved configuration.
7. Click the Revert button to revert the screen back to its last saved configuration. Changes made since the
contents of the screen were last applied are discarded.
Threshold values for:
MU Displays a threshold value for associated MUs. Use the Threshold Name and Threshold
Conditions as input criteria to define an appropriate Threshold Value unique to the MUs
within the network. For information on specific values, see Wireless Trap Threshold Values
on page 7-15 .
Threshold values for:
AP Set a threshold value for associated radios. Use the Threshold Name and Threshold
Conditions as input criteria to define an appropriate Threshold Value unique to the radios
within the network. For information on specific values, see Wireless Trap Threshold Values
on page 7-15 .
Threshold values for:
WLAN Define a threshold value for associated WLANs. Use the Threshold Name and Threshold
Conditions as input criteria to define an appropriate Threshold Value unique to the WLANs
within the network. For information on specific values, see Wireless Trap Threshold Values
on page 7-15 .
Threshold values for:
Switch Use the Threshold Name and Threshold Conditions as input criteria to define an
appropriate Threshold Value unique to the module. For information on specific values, see
Wireless Trap Threshold Values on page 7-15 .
Unit of Threshold
Values Displays the measurement value used to define whether a threshold value has been
exceeded. Typical values include Mbps, retries and %. For information on specific values, see
Wireless Trap Threshold Values on page 7-15 .