3 viewing address resolution, 3 viewing address resolution -8, Viewing address resolution – Motorola Series Switch WS5100 User Manual
Page 82
4-8 WS5100 Series Switch System Reference Guide
6. Click
OK
to use the changes to the running configuration and close the dialog.
7. Click
Cancel
to close the dialog without committing updates to the running configuration.
4.2.3 Viewing Address Resolution
The
Address Resolution
table displays the mapping of layer three (IP) addresses to layer two (MAC)
addresses. To view the details of the tab:
1. Select
Network
>
Internet Protocol
from the main tree menu.
2. Select the
Address Resolution
tab.
3. Refer to the
Address Resolution
table for the following information:
4. Click the
Clear
button to remove the selected AP entry if no longer usable.
Interface
Displays the name of the actual interface on which the IP address was found
(typically a VLAN).
IP Address
Displays the IP address being resolved.
MAC Address
Displays the MAC address that correspond to the IP address being resolved.
Type
Defines whether the entry was added statically or created dynamically due to network
traffic. Entries are typically static.