Motorola Series Switch WS5100 User Manual
Page 296
6-72 WS5100 Series Switch System Reference Guide
2. Select the
Groups
tab.
3. Refer to the displayed user groups to assess the following read-only attributes for each group listed:
4. Refer to the
WLANs Assigned
area of the Groups tab to review which switch WLANs are available for
use with configured groups.
5. Refer to the
Time of access in days
field to assess the intervals (which days) the group has been
assigned access to the switch managed network (after each user has been authenticated). At least one
day is required to be selected.
This value is read-only within the Groups tab. Click
Edit
to modify the access assignments of an existing
group or click
Add
to create a new group with unique access assignments.
Name
Displays the unique name assigned to each group. The group name should be indicative of
the user population within and their shared activity within the switch managed network.
Guest Group
Displays whether a specific group has been defined as a guest group (with a red X) or has
been configured as permanent group. Guest users have temporary Radius server access.
VLAN ID
Display the VLAN ID(s) used by each group listed. The VLAN ID is representative of the
shared SSID each group member (user) employs to interoperate with one another within the
switch managed network (once authenticated by the local Radius server).
Time of Access Start
Displays the time each group was (will be) authenticated to interoperate within the switch
managed network. Each user within the group will be authenticated with the local Radius
server. Those group members successfully authenticated are allowed access to the switch
managed network using the restrictions defined for the group.
Time of Access End
Displays the time each group’s user base will loose access privileges within the switch
managed network. After this time, users within this group will not be authenticated by the
local Radius server. However, if a user is part of a different group that has not exceeded their
access end interval, then the user may still interoperate with the switch (remain
authenticated) as part of that group.