Motorola Series Switch WS5100 - Manual (Page 164)

4-90 WS5100 Series Switch System Reference Guide
6. Click Apply to save the changes made within the screen.
7. Click Revert to cancel the changes made and revert back to the last saved configuration.
4.8.4 Configuring WMM
Use the WMM tab to review each radio type, as well as the Access Category that defines which data type
(Video, Voice, Best Effort and Background) the radio has been configured to process. Additionally, the WMM
screen displays the transmit intervals defined for the target access category. Radio WMM parameters are
for downstream while WLAN WMM parameters are for upstream
To view existing WMM Settings:
1. Select Network Setup > Radio Adoption Defaults from the main menu tree.
2. Click the WMM tab.
3. Refer to the WMM table for the following information:
AP Type Displays whether the radio is an 802.11a radio or an 802.11bg radio. This value is read-only
and cannot be modified.
Access Category Displays the Access Category currently in use. There are four categories: Video, Voice, Best
Effort and Background. Click the Edit button to change the current Access Category. Ensure
the Access Category reflects the radios intended network traffic.
AIFSN Displays the current Arbitrary Inter-frame Space Number. Higher-priority traffic categories
should have lower AIFSNs than lower-priority traffic categories. This will causes lower-
priority traffic to wait longer before trying to access the medium
Transmit Ops Displays the maximum duration a device can transmit after obtaining a transmit opportunity.
For Higher-priority traffic categories, this value should be set higher.