Motorola Series Switch WS5100 User Manual
Page 272
6-48 WS5100 Series Switch System Reference Guide
3. Click the
Add
button.
4. Define the following information as required for the new transform set.
5. Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
6. Click
OK
to use the changes to the running configuration and close the dialog.
7. Click
Cancel
to close the dialog without committing updates to the running configuration.
Name
Create a name describing this new transform set.
AH Authentication
Scheme
Select the
Use AH
checkbox to define the AH Transform Authentication scheme. Options
include:
• None - No AH authentication is used.
• AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
ESP Encryption
Scheme
Select the
Use ESP
checkbox to define the ESP Encryption Scheme. Options include:
• None - No ESP encryption is used with the transform set.
• ESP-DES - ESP with the 56-bit DES encryption algorithm.
• ESP-3DES - ESP with 3DES, ESP with AES.
• ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
• ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
• ESP-AES 256- ESP with 3DES, ESP with AES (256 bit key).
ESP Authentication
Scheme
Select the
Use ESP
checkbox to define the ESP Authentication Scheme. Options include:
• None - No ESP authentication is used with the transform set.
• MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Mode
Define the current mode used with the transform set. The mode is either Tunnel or Transport.