1 adding a new discovery profile – Motorola Series Switch WS5100 User Manual
Page 222
5-52 WS5100 Series Switch System Reference Guide
If SNMP v3 is used with a discovering profile, a
V3 Authentication
screen displays.The User Name and
Password entered is required to match the name used by the remote network management software of
the discovered switch
When the credentials of the V2 Read Community or V3 Authentication screens are satisfied, the switch
discovery process begins.
7. If necessary, click the
Stop Discovery
button (enabled only during the discovery operation) to stop the
discovery operation.
5.8.1.1 Adding a New Discovery Profile
If the contents of an existing profile are to longer relevant to warrant modification using the Edit function,
then a new switch discovery profile should be created.
To create a new switch discovery profile:
1. Select
Services
>
Discovery
from the main menu tree.
The
Discovery
page launches with the
Discovery Profiles
tab displayed.
2. Click the
Add
button at the bottom of the screen.
3. Define the following parameters for the new switch discovery profile:
Profile Name
Define a user-assigned name used to title the profile. The profile name should associate the
profile with the group of devices or area where the discovered devices are anticipated to be
located.
Start IP Address
Enter the starting numeric (non DNS) IP address from where the search for available network
devices is conducted.