Motorola Series Switch WS5100 - Manual (Page 308)

6-84 WS5100 Series Switch System Reference Guide
8. Use the Using drop down-menu to configure whether the log file transfer will be sent using FTP or TFTP.
9. Enter the IP Address of destination server or system receiving the target log file.
10.Enter the User ID credentials required to send the file to the target location.
Use the user ID for FTP transfers only.
11.Enter the Password required to send the file to the target location using FTP.
12.Specify the appropriate Path name to the target directory on the local system disk or server as
configured using the "To" parameter.
If the local server option is selected, use the browse button to specify the location on the local server.
13.Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
14.Click the Transfer button when ready to move the target file to the specified location.
Repeat the process as necessary to move each desired log file to the specified location.
15.Click the Close button to exit the screen after a transfer. There are no changes to save or apply.