2 adding a new wireless filter, 2 adding a new wireless filter -15, Adding a new wireless filter on – Motorola Series Switch WS5100 User Manual
Page 239
Switch Security
6-15
10.Click
Cancel
to close the dialog without committing updates to the running configuration.
6.4.2 Adding a new Wireless Filter
Use the
Add
screen to create a new index and define a new address permission range. Once created, an
allow or deny designation can be applied to the new filter ACL.
To create a new filter ACL:
1. Select
Security > Wireless Filters
from the main menu tree.
2. Click the
Add
button at the bottom of the screen to launch a new dialogue used for creating an ACL.
Define an Index (numerical identifier) for the ACL and starting an ending MAC address range for the
devices allowed or denied access to the switch managed network.
3. Enter an Index numerical value (1 -1000) in the
MU-ACL Index
field.
The MU-ACL Index is a numerical identifier used to associate a particular ACL to a range of MAC
addresses (or a single MAC address) either allowed or denied access to the switch managed network.
Enter a new Index to define a new MAC Address range and allow/deny ACL Index designation.
4. Enter the a hex value for the
Starting MAC
address.
This is the beginning MAC address either allowed or denied access to the switch managed network.
5. Enter the a hex value for the
Ending MAC
address. Enter the same Starting MAC address within the
Ending MAC
field to use only the
Starting MAC
address as either allowed or denied access to the
switch managed network.
6. Use the drop-down menu to select
Allow
or
Deny
.
This rule applies to the MUs within the specified Starting and Ending MAC Address range. For example,
if the adoption rule is to Allow, access is granted for all MUs within the specified range.
7. Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
8. Click
OK
to use the changes to the running configuration and close the dialog.
9. Click
Cancel
to close the dialog without committing updates to the running configuration.