Motorola Series Switch WS5100 User Manual

Page 109

Network Setup

4-35

4. Select the

Hotspot

button from within the Authentication field.

Ensure

Advanced

is selected from within the

This WLAN’s Web Pages are of the

drop-down menu.

5. Once the properties of the advanced hotspot have been defined, the file can be installed on the switch

and used to support the hotspot. The following parameters are required to upload the file on the switch:

a. Specify a source hotspot configuration file. The file used at startup automatically displays within the

File

parameter.

b. Use the

Using

drop-down menu to configure whether the hotspot file transfer is conducted using

FTP or TFTP.

c. Enter the

IP Address

of the server or system receiving the source hotspot configuration. Ensure the

IP address is valid or risk jeopardizing the success of the file transfer.

d. If using FTP, enter the

User ID

credentials required to transfer the configuration file from a FTP server.

e. If using FTP, enter the

Password

required to send the configuration file from an FTP server.

f. Specify the appropriate

Path

name to the hotspot configuration on the local system disk or server.

NOTE: Advanced hotspot configuration is not permissible using the switch Web UI. Refer
to the switch CLI or other advanced configuration options to define a hotspot with
advanced properties. However, the switch can still install and maintain directories
containing Web page content.