Motorola Series Switch WS5100 - Manual (Page 64)

3-20 WS5100 Series Switch System Reference Guide
3. Refer to the Target field to specify the details of the target file.
4. Click the Transfer button when ready to move the target file to the specified location. Repeat the process
as necessary to move each desired log file to the specified location.
5. Refer to the Status field for the current state of the requests made from the applet. Requests are any
“SET/GET” operation from the applet. The Status field displays error messages if something goes wrong
in the transaction between the applet and the switch.
6. Click the Close button to exit the Transfer screen and return to the Config Files screen. Once a file is
transferred, there is nothing else to be saved within the Transfer screen.
3.4 Viewing Switch Firmware Information
The switch can store two software versions. Information about the two versions displays within the
Firmware screen. The Version column displays the version string. The Build Time is the date and time
each version was generated. Install represents the date and time the upgrade was performed. Next Boot
indicates which version should be used on the next reboot. The Next Boot version should match the Running
Version , unless the system has failed over to another version.
Password Enter the Password required to send the configuration file from an FTP server.
Path Specify the appropriate Path name to the target directory on the local system disk or server.
The Target options are different depending on the target selected.
To Use the To drop-down menu to define the location of the configuration file. Options include
the switch (default location), external server or local disk.
File Use the Browse button to browse to a target file for the file transfer. If the switch is
selected from the From drop-down menu (within the Source field), the file used at startup
automatically displays.