2 viewing discovered switches, 2 viewing discovered switches -53 – Motorola Series Switch WS5100 User Manual
Page 223
Switch Services
5-53
4. Refer to the
Status
field for an update of the edit process.
The Status is the current state of the requests made from the applet. Requests are any “SET/GET”
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
5. Click
OK
to save the changes to the running configuration and close the dialog.
6. Click
Cancel
to close the dialog without committing updates to the running configuration.
5.8.2 Viewing Discovered Switches
Refer to the
Saved Devices
tab to view a table of those devices discovered by the current discovery
process. Each discovered device compatible with the locating switch (running switch software version 3.0 or
higher) is displayed in a shaded color to distinguish it from non-compatible devices. The switch Web UI
enables users display the Web UI of the discovered device in a separate browser window.
To view the devices located by the switch:
1. Select
Services
>
Discovery
from the main menu tree.
The
Discovery
page launches with the
Discovery Profiles
tab displayed.
2. Select the
Saved Devices
tab.
End IP Address
Enter the ending numeric (non DNS) IP address from where the search for available network
devices is conducted
SNMP Version
Use the SNMP Version drop-down menu to define the version of the SNMP (either SNMP v2
or v3) used for discovering available network devices.