beautypg.com

2 defining the ipsec vpn remote configuration, 2 defining the ipsec vpn remote configuration -49, Defining the ipsec vpn remote configuration – Motorola Series Switch WS5100 User Manual

Page 273

background image

Switch Security

6-49

6.8.2 Defining the IPSec VPN Remote Configuration

Use the IPSec VPN Remote tab to configure the DNS and/or WINS Servers used to route packets to the
remote end of the IPSec VPN tunnel. The Remote is also used for defining the IP address range used within
the IPSec VPN tunnel and configuring the user authentication scheme for user permissions within the IPSec
VPN tunnel.

To define the IPSEc VPN remote configuration:

1. Select

Security

>

IPSec VPN

from the main menu tree.

2. Click the

Remote

tab.

3. Refer to the

Configuration

field to define the following information.

4. Click the

IP Range

tab to view the following information.

DNS Server

Enter the numerical IP address of the DNS Server used to route information to the remote
destination of the IPSec VPN.

WINS Server

Enter the numerical IP address of the WINS Server used to route information to the remote
destination of the IPSec VPN.

Apply

Click

Apply

to save any updates you may have made to the screen.

Revert

Click the

Revert

button to disregard any changes you have made and revert back to the last

saved configuration.

Index

Enter the index assigned to the range of IP addresses displayed in the Starting and Ending IP
Address ranges. This index is used to differentiate the index from others with similar IP
addresses.