Motorola Series Switch WS5100 - Manual (Page 219)

Switch Services 5-49
3. Select an existing neighbor and click the Edit button.
The radio index and description for the current radio display in the upper right corner of the screen. The
Available Radios value represents the radios that can be added as a neighbor for the target radio.
Neighbor Radios are existing radios (neighbors).
4. Select one of the following four actions from the Self Healing Action drop-down menu:
• None: The radio takes no action at all when its neighbor radio fails.
• Open Rates: The radio will default to factory-default rates when its neighbor radio fails.
• Raise Power: The radio raises its transmit power to the maximum provided its power is lower than
the maximum permissible value.
• Both: The radio will open its rates as well as raise its power.
5. Click the Add button to move a radio from the Available Radios list to the Neighbor Radios list. Do this
dedicate the neighbors for this radio.
6. Select a radio and click the Remove button to move the radio from the Neighbor Radios list to Available
Radios list.
7. Refer to the Status field for an update of the edit process.
The Status is the current state of the requests made from the applet. Requests are any “SET/GET”
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
8. Click OK to save the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.