1 configuring self healing neighbor details, 1 configuring self healing neighbor details -47 – Motorola Series Switch WS5100 User Manual
Page 217
Switch Services
5-47
3. Refer to the Interference Avoidance field to define the following settings:
4. Click the
Apply
button to save the changes made within this screen. Clicking Apply overwrites the
previous configuration.
5. Click the
Revert
button to disregard any changes made within this screen and revert back to the last
saved configuration.
5.7.1 Configuring Self Healing Neighbor Details
The Neighbor Details page displays all the radios configured on the switch and their neighbor designations.
To configure self-healing on the switch:
1. Select
Services
>
Self Healing
from the main menu tree.
The Self Healing page launches with the
Configuration
tab displayed.
2. Select the
Neighbor Details
tab.
The top right-hand corner of the screen displays whether Neighbor recovery is currently enabled or
disabled. To change the state, click the Enable Neighbor Recovery checkbox on the Self Healing
Configuration screen.
Enable Interference
Avoidance
Select
Enable Interference Avoidance
to enable the Interference Avoidance feature. The
switch is capable of switching channels on an access port (Automatic Channel Selection) if
the interference is observed on the current operating channel.
Average Retries
The Average Number of Retries is the average number of retries for a MU to communicate
with a neighbor radio. Define a retry value between 0.0 and 15.0 retry attempts. The Average
Retries is a threshold value, when exceeded ACS is initiated.
Hold Time
Set the interval (in seconds) that disables interference avoidance after detection. The hold
time prevents the radio from re-running ACS continuously.