Motorola Series Switch WS5100 User Manual
Page 316
7-8 WS5100 Series Switch System Reference Guide
4. Highlight an existing v3 entry and click the
Edit
button to modify the password for the Auth Protocol and
Priv Protocol.
For additional information, see Editing an Existing SNMP v1/v2 Community Name on page 7-6
5. Highlight an existing SNMP v3 User Name and click the
Enable
button to enable the log-in for the
specified user. When selected the status of the user is defined as active.
6. Highlight an existing SNMP v3 User Name and click the
Disable
button to disable the log-in for the
specified user. When selected the status of the user is defined as inactive.
7.3.2.1 Editing a SNMP v3 Authentication and Privacy Password
The
Edit
screen enables the user to modify the password required to change the authentication keys.
Updating the password requires logging off of the system. Updating the existing password creates new
authentication and encryption keys. To edit an SNMP v3 user profile:
1. Select
Management Access > SNMP Access
from the main menu tree.
2. Select the
v3
tab from within the SNMP Access screen.
3. Highlight an existing SNMP v3 User Name and click the
Edit
button.
The
Authentication Protocol
is the existing protocol for the User Profile. The Authentication Protocol
is not an editable option. The
Privacy Protocol
is the existing protocol for the User Profile. The Privacy
Protocol is also not an editable option.
4. Enter the
Old Password
used to grant Authentication Protocol and Privacy Protocol permissions for the
User Profile.
5. Enter the
New Password
, then verify the new password within the
Confirm New Password
area.
6. Click
OK
to save and add the changes to the running configuration and close the dialog.
7. Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
8. Click
Cancel
to close the dialog without committing updates to the running configuration.