Motorola Series Switch WS5100 - Manual (Page 280)

6-56 WS5100 Series Switch System Reference Guide
2. Click the Crypto Maps tab and select Peers .
3. Refer to the read-only information displayed within the Peers tab to determine whether a peer
configuration (among those listed) requires modification or a new peer requires creation.
4. If a Crypto Map Seq # or IKE peer requires revision, select it from amongst those displayed and click the
Edit button to revise its configuration.
5. Select an existing Crypto Map and click the Delete button to remove from the list of those available to
the switch.
6. If a new peer requires creation click the Add button.
Priority / Seq # Displays each peer’s Seq # (sequence number) in order to distinguish one from the other. The
sequence number determines its priority among Crypto Maps. The lower the number, the
higher the priority.
Peer Name Displays the name assigned to the peer to differentiate it from others with similar
configurations.
IKE Peer Displays the IKE peer used with the Crypto Map to build an IPSec security association.