2 editing ap settings – Motorola Series Switch WS5100 User Manual
Page 142
4-68 WS5100 Series Switch System Reference Guide
7. Click
OK
to save the changes and return to the previous screen.
Port Authentication
To configure the port authentication settings on an access port:
1. Select
Network
>
Access Port Radios
from the main menu tree.
2. Click the
Configuration
tab.
3. Click the
Global Settings
button.
4. Click the
Configure Port Authentication
button.
5. Enter the 802.1x
Username
assigned to the access port.
6. Enter the 802.1x
Password
(for the corresponding username) providing authorization for access port
authorization adoption.
7. Check the
Use Default Values
option checkbox to set the Username and Password to factory default
values. The access port can get disconnected if the 802.1x authenticator is not configured accordingly.
8. Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
9. Click
OK
to use the changes to the running configuration and close the dialog.
10.Click
Cancel
to close the dialog without committing updates to the running configuration.
4.7.1.2 Editing AP Settings
The
Edit
screen provides a means of modifying the properties of an existing radio. This is often necessary
when the radio’s intended function has changed and its name needs modification or if the radio now needs
to be defined as a detector radio. The Edit screen also enables you to modify placement, channel and power
NOTE: The 802.1x username and password information is only passed to adopted access
ports when the username and password are set. Any AP adopted after this will not
automatically receive the username and password.
NOTE: After setting the username and password to factory default settings, the system
must be rebooted before the factory default settings will take effect.