Motorola Series Switch WS5100 - Manual (Page 163)

Network Setup 4-89
2. Click the WLAN Assignment t ab.
The Assigned WLANs tab displays two fields: Select Radios/BSS and
Select/Change Assigned WLANs .
3. With the Select Radios/BSS field, select the radio type to configure (802.11a or 802.11bg) from the
Select Radio drop-down menu.
4. Select the desired BSS from the BSS list or select a Radio (802.11a or 802.11bg) to modify.
5. Refer to the Select/Change Assigned WLAN field for the following information:
Primary WLAN If a specific BSS was selected from the Select Radio/BSS area, choose one of the selected
WLANs from the drop-down menu as the primary WLAN for the BSS.
If the radio was selected, the applet will automatically assign one WLAN to each BSS in
order, and that WLAN will be set as the
Primary WLAN for the BSS.
If the number of WLANs selected is greater than the number of BSSIDs, the remaining
WLANs are included with the last BSS.
Assign Assign the WLAN to the selected BSS or Radio.
Index Displays (in ascending order) the numerical index assigned to each SSID. Use the index
(along with the WLANs name) as a mean of identifying particular WLANs after they have
been assigned to different radio BSSIDs. A BSSID cannot support two WLANs with the same
numerical index value.
Description Use the WLAN Description (along with the WLANs index) as a means of identifying
particular WLANs after they have been assigned to different radio BSSIDs. A BSSID cannot
support two WLANs with the same description.
ESS ID Displays the assigned SSID uniquely distributed between the WLANs assigned to the
BSSIDs.
VLAN Displays the VLAN ID of VLANs assigned to WLANs. By default, all WLANs are assigned to
VLAN 1.