beautypg.com

Configuring wep 128 / keyguard on – Motorola Series Switch WS5100 User Manual

Page 115

background image

Network Setup

4-41

6. Use the

Key #1-4

areas to specify key numbers.

The key can be either a hexadecimal or ASCII. For WEP 64 (40-bit key), the keys are 10 hexadecimal
characters in length or 5 ASCII characters. Select one of these keys for activation by clicking its radio
button.

Default (hexadecimal) keys for WEP 64 include:

7. If you feel it necessary to restore the WEP algorithm back to its default settings, click the

Restore

Default WEP Keys

button. This may be the case if you feel the latest defined WEP algorithm has been

compromised and longer provides its former measure of data security.

8. Refer to the

Status

field for the current state of the requests made from applet. This field displays error

messages if something goes wrong in the transaction between the applet and the switch.

9. Click

OK

to use the changes to the running configuration and close the dialog.

10.Click

Cancel

to close the dialog without committing updates to the running configuration.

Configuring WEP 128 / KeyGuard

WEP 128 provides a more robust encryption algorithm that WEP 64 by requiring a longer key length and pass
key. Thus, making it harder to hack through the replication of WEP keys. WEP 128 may be all that a small-
business user needs for the simple encryption of wireless data.

KeyGuard is a proprietary encryption method developed by Motorola Technologies. KeyGuard is Motorola's
enhancement to WEP encryption, and was developed before the finalization of WPA-TKIP. This encryption
implementation is based on the IEEE Wireless Fidelity (Wi-Fi) standard, 802.11i.

To configure WEP 128 or KeyGuard:

1. Select

Network

>

Wireless LANs

from the main menu tree.

2. Select an existing WLAN from those displayed within the

Configuration

tab and click the

Edit

button.

A WLAN screen displays with the WLAN’s existing configuration. Refer to the

Authentication

and

Encryption

columns to assess the WLAN’s existing security configuration.

3. Select either the

WEP 128

or

KeyGuard

button from within the Encryption field.

4. Click the

Config

button to the right of the WEP 128 and KeyGuard checkboxes.

The

WEP 128 / KeyGuard

screen displays.

Key 1

1011121314

Key 2

2021222324

Key 3

3031323334

Key 4

4041424344