beautypg.com

Motorola Series Switch WS5100 User Manual

Page 107

background image

Network Setup

4-33

2. Select the

Hotspot

button from within the Authentication field. Ensure

External

is selected from within

the

This WLAN’s Web Pages are of the

drop-down menu.

3. Refer to the

External Web Pages

field and provide the Login, Welcome and Failed Page URLs used by

the external Web server to support the hotspot.

4. Refer to the

Allow List

field, and enter any IP address (for internal or external Web sites) that may be

accessed by the Hotspot user without authentication.

Login Page URL

Define the complete URL for the location of the Login page. The Login screen will prompt the
hotspot user for a username and password to access the Welcome page.

Welcome Page URL

Define the complete URL for the location of the Welcome page. The Welcome page assumes
the hotspot user has logged in successfully and can access the Internet.

Failed Page URL

Define the complete URL for the location of the Failed page. The Failed screen assumes the
hotspot authentication attempt has failed, you are not allowed to access the Internet and you
need to provide correct login information to access the Web.

NOTE: In certain instances, an associated MU may not be able to ping the host within the
hotspot. For instance, a hotspot supported WLAN is enabled. Within the Allowed List, a
network (157.235.95.0) is added. An MU is associated, and an IP address is obtained for
the MU. The MU is then unsuccessful in pinging the host IP address (157.235.95.54) from
within the hotspot. Consequently, the Allowed List should be used for host IPs only.