Motorola Series Switch WS5100 - Manual (Page 148)

4-74 WS5100 Series Switch System Reference Guide
3. Click the Add button to display at screen containing settings for adding a radio
4. Enter the device MAC Address (the physical MAC address of the radio). Ensure this address is the actual
hard-coded MAC address of the device.
5. Use the AP Type drop-down menu to define the radio type you would like to add. If adding an AP-4131
model access point, its access port conversion will render the access point a “thin” access port.
6. Select the radio type checkboxes corresponding to the type of AP radio used.
7. Enter a numerical value in the Radio Index field for each selected radio.
The Radio Index is a numerical value assigned to the radio as a unique identifier. For example; 1, 2, or 3.
The index is helpful for differentiating radios of similar type and configuration.
8. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10.Click Cancel to close the dialog without committing updates to the running configuration.
4.7.2 Viewing AP Statistics
Refer to the Statistics tab for information and high-level performance data for individual radios.
Performance information can be reviewed for either a 30 second or one hour interval. Use the Details button
to display additional information for an individual radio.
To view Radio Statistics:
1. Select Network > Access Port Radios from the main menu tree.