beautypg.com

3 configuring ipsec vpn authentication, 3 configuring ipsec vpn authentication -50, Configuring ipsec vpn authentication – Motorola Series Switch WS5100 User Manual

Page 274

background image

6-50 WS5100 Series Switch System Reference Guide

5. Click the

Edit

button (within the IP Range tab) to modify the range of existing IP addresses displayed.

6. Select an IP address range index and click the

Delete

button to remove this specific range from those

available within the IP Range tab.

7. To add a new range of IP addresses, click the

Add

button (within the IP Range tab) and define the range

in the fields provided. Click

OK

when completed to save the changes.

6.8.3 Configuring IPSEC VPN Authentication

If IKE is not used for establishing security associations, there is no negotiation of security associations, so
the configuration information in both systems must be the same for traffic to be processed successfully by
IPSec. Select the Authentication tab to define the credential verification mechanisms used with the IPSEC
VPN configuration.

To define the IPSEc VPN authentication configuration:

1. Select

Security

>

IPSec VPN

from the main menu tree.

Starting IP Address

Enter the numerical IP address used as the starting address for the range defined. If the
Ending IP address is left blank, then only the starting address is used for the remote
destination.

Ending IP Address

Enter a numerical IP address to complete the range. If the Ending IP address is blank, then
only the starting address is used as the destination address.