Motorola Series Switch WS5100 - Manual (Page 292)

6-68 WS5100 Series Switch System Reference Guide
1. Select Security > Radius Server from the main menu.
2. Select the Authentication tab.
3. Refer to the Authentication field to define the following Radius authentication information:
EAP and Auth Type Specify the EAP type for the Radius server.
• PEAP uses a TLS layer on top of EAP as a carrier for other EAP modules. PEAP is an ideal
choice for networks using legacy EAP authentication methods.
• TTLS is similar to EAP-TLS, but the client authentication portion of the protocol is not
performed until after a secure transport tunnel has been established. This allows EAP-
TTLS to protect legacy authentication methods used by some Radius servers.
Auth Data Source Use Auth Data Source drop-down menu to select the data source for the local Radius
server.
• If Local is selected, the switch’s internal user database serves as the data source for
user authentication. Refer to the Users and Groups tabs to define user and group
permissions for the switch’s local Radius server.
• If LDAP is selected, the switch uses the data within an LDAP server.