FUJITSU SPARC T5440 - Manual (Page 95)

Preparing to Service the System 69
Performing Electrostatic Discharge –
Antistatic Prevention Measures
Related Information
■ “Electrostatic Discharge Safety Measures” on page 61
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 69
▼ Perform Electrostatic Discharge – Antistatic
Prevention Measures
1. Prepare an antistatic surface to set parts on during the removal, installation, or
replacement process.
Place ESD-sensitive components such as the printed circuit boards on an antistatic
mat. The following items can be used as an antistatic mat:
■ Antistatic bag used to wrap a replacement part
■ ESD mat
■ A disposable ESD mat (shipped with some replacement parts or optional
system components)
2. Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your
wrist and then to a metal area on the chassis.
Removing the Top Cover
▼ Remove the Top Cover
Before you begin, complete these tasks: