FUJITSU SPARC T5440 - Manual (Page 43)

Managing Faults 17
■ “Detecting Faults Using LEDs” on page 30
■ “Detecting Faults Using Solaris OS Files and Commands” on page 35
■ SPARC Enterprise T5440 Server Installation and Setup Guide
■ SPARC Enterprise T5440 Server Administration Guide
■ Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server
ALOM CMT Compatibility Shell Overview
The default shell for the service processor is the ILOM shell. However, you can use
the ALOM CMT compatibility shell to emulate the ALOM CMT interface supported
on the previous generation of CMT servers. Using the ALOM CMT compatibility
shell (with a few exceptions) you can use commands that resemble the commands of
ALOM CMT.
The service processor sends alerts to all ALOM CMT users that are logged in, sends
the alert through email to a configured email address, and writes the event to the
ILOM event log. The ILOM event log is also available using the ALOM CMT
compatibility shell.
See the Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server
for comparisons between the ILOM CLI and the ALOM CMT compatibility CLI, and
for instructions for adding an ALOM-CMT account.
Related Information
■ “Diagnostic Flowchart” on page 11
■ “Detecting Faults Using LEDs” on page 30
■ “ILOM-to-ALOM CMT Command Reference” on page 53
■ SPARC Enterprise T5440 Server Installation and Setup Guide
■ SPARC Enterprise T5440 Server Administration Guide
■ Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server
Solaris Predictive Self-Healing Overview
The Solaris Predictive Self-Healing (PSH) technology enables the server to diagnose
problems while the Solaris OS is running, and mitigate many problems before they
negatively affect operations.