FUJITSU SPARC T5440 - Manual (Page 73)

Managing Faults 47
Clearing Faults
This section describes how to clear faults.
Note – Some system faults are cleared automatically.
Related Information
■ “Diagnostic Flowchart” on page 11
■ “POST Fault Management Overview” on page 19
■ “Solaris Predictive Self-Healing Overview” on page 17
■ SPARC Enterprise T5440 Server Administration Guide
■ Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server
■ External I/O Expansion Unit Installation and Service Manual for SPARC Enterprise
T5120/T5140/T5220/T5240/T5440 Servers
Schedule a repair procedure to replace the affected CPU, the
identity of which can be determined using fmdump -v -u .
Details
The Message ID: SUN4V-8000-JA indicates diagnosis has
determined that a CPU is faulty. The Solaris fault manager arranged
an automated attempt to disable this CPU....
Task Topic
Clear faults detected during POST. “Clear Faults Detected During POST” on
page 48
Clear faults detected by PSH. “Clear Faults Detected by PSH” on page 49
Clear faults detected in the Internal I/O
Expansion Unit “Clear Faults Detected in the External I/O
Expansion Unit” on page 50
CODE EXAMPLE: PSH Message Output (Continued)