FUJITSU SPARC T5440 - Manual (Page 50)

24 SPARC Enterprise T5440 Server Service Manual • July 2009
Displaying FRU Information with ILOM
▼ Display System Components With the ILOM
show components Command
The show components command displays the system components (asrkeys) and
reports their status.
● At the -> prompt, type the show components command.
CODE EXAMPLE: Output of the show components Command With No
Disabled Components on page 24
shows partial output with no disabled
components.
CODE EXAMPLE: Output of the show components Command Showing
Disabled Components on page 25
shows the showcomponents command output
with a component disabled.
CODE EXAMPLE: Output of the show components Command With No Disabled Components
-> show components
Target | Property | Value
--------------------+------------------------+-------------------------------
/SYS/MB/PCIE0 | component_state | Enabled
/SYS/MB/PCIE3/ | component_state | Enabled
/SYS/MB/PCIE1/ | component_state | Enabled
/SYS/MB/PCIE4/ | component_state | Enabled
/SYS/MB/PCIE2/ | component_state | Enabled
/SYS/MB/PCIE5/ | component_state | Enabled
/SYS/MB/NET0 | component_state | Enabled
/SYS/MB/NET1 | component_state | Enabled
/SYS/MB/NET2 | component_state | Enabled
/SYS/MB/NET3 | component_state | Enabled
/SYS/MB/PCIE | component_state | Enabled
CODE EXAMPLE: Output of the show components Command Showing Disabled Components
-> show components
Target | Property | Value
--------------------+------------------------+-------------------------------
/SYS/MB/PCIE0/ | component_state | Enabled
/SYS/MB/PCIE3/ | component_state | Disabled
/SYS/MB/PCIE1/ | component_state | Enabled
/SYS/MB/PCIE4/ | component_state | Enabled