Useful sunvts tests, Related information, Detecting faults using post – FUJITSU SPARC T5440 User Manual
Page 68
42
SPARC Enterprise T5440 Server Service Manual • July 2009
Useful SunVTS Tests
TABLE: Useful SunVTS Tests on page 42
describes the SunVTS tests which are useful
for diagnosing issues with the SPARC Enterprise T5440 server.
Related Information
■
“Diagnostic Flowchart” on page 11
■
“SunVTS Software Packages” on page 41
■
SPARC Enterprise T5440 Server Installation and Setup Guide
■
SPARC Enterprise T5440 Server Administration Guide
Detecting Faults Using POST
Run POST in maximum mode to detect system faults. See
.
POST error messages use the following syntax:
c:s > ERROR: TEST = failing-test
c:s > H/W under test = FRU
c:s > Repair Instructions: Replace items in order listed by H/W under
test above
c:s > MSG = test-error-message
c:s > END_ERROR
In this syntax, c = the core number, s = the strand number.
Warning and informational messages use the following syntax:
TABLE:
Useful SunVTS Tests
SunVTS Tests
FRUs Exercised by Tests
Memory Test
FB-DIMMs
Processor Test
CMP, motherboard
Disk Test
Disks, cables, disk backplane, DVD drive
Network Test
Network interface, network cable, CMP,
motherboard
Interconnect Test
Board ASICs and interconnects
IO Ports Test
I/O (serial port interface), USB subsystem
Environmental Test
Motherboard and service processor