FUJITSU SPARC T5440 - Manual (Page 208)

182 SPARC Enterprise T5440 Server Service Manual • July 2009
CMP/memory module, 100
DVD-ROM drive, 119
fan tray, 82, 84
fan tray carriage, 131
FB-DIMMs, 105
flex cable assembly, 142
front bezel, 117
front control panel, 145
front I/O board, 148
hard drive, 75, 78
hard drive backplane, 133
IDPROM, 124
motherboard, 138
PCIe card, 94
power distribution board, 128
power supply, 87, 90
service processor, 122
top cover, 150
Integrated Lights Out Manager
and fault detection in External I/O Expansion
Unit, 15
iostat -E command, 77
L
latch
power supply, 86, 89
slide rail, 66
LED
AC Present (power supply LED), 12, 92
DC OK (power supply LED), 91
Fan Fault (system LED), 31
Fault (fan module LED), 31
Fault (hard drive LED), 31
Fault (power supply LED), 31, 86, 92
FB-DIMM Fault (motherboard LEDs), 32
Gigabit Ethernet port, 8
Locator, 4, 7
Overtemp (system LED), 5, 31
Power OK (system LED), 12
Power Supply Fault (system LED), 5, 31, 88, 92
Ready-to-Remove (hard drive LED), 74, 76
Service Required (system LED), 4, 31, 92
Top (system LED), 5
LEDs
about, 30
fan module, 31
fan tray, 84
front panel, 4
hard drive, 80
network management port, 8
rear panel, 7
Service Required (system LED), 32
using to diagnose faults, 30
using to identify device state, 30
Locator LED and button, 3, 4, 5, 7
log files, viewing, 36
logical domains
guest configuration, 162
M
MAC addresses, stored on SCC module, 2
maintenance position, 65, 67
memory
also see FB-DIMMs
fault handling, 21
memory modules
see CMP/memory modules
message ID, 18
messages
file, 35
motherboard
about, 1
fastener locations, 139
installing, 138
removing, 135
N
network management port
LEDs, 8
pinouts, 168
node reconfiguration, 155
and I/O services, 156
I/O device nodes, 158
PCIe, 158
Normal mode (virtual keyswitch position), 108
also see setkeyswitch command.
O
Overtemp (system LED), 5, 31
overtemperature condition, 31
P
PCIe card
adding, 94
configuration guidelines, 97