Start the sunvts browser environment – FUJITSU SPARC T5440 User Manual

Page 65

Managing Faults

The SunVTS installation process requires that you specify one of two security
schemes to use when running SunVTS. The security scheme you choose must be
properly configured in the Solaris OS for you to run the SunVTS software. For
details, refer to the SunVTS User’s Guide.

1. Check for the presence of SunVTS packages using the pkginfo command.

■

If the SunVTS software is installed, information about the packages is
displayed.

■

If the SunVTS software is not installed, you see an error message for each
missing package, as in

CODE EXAMPLE: Missing Package Errors for SunVTS

Software on page 39

See

TABLE: SunVTS Software Packages on page 41

for a list of required SunVTS

software packages.

2. If the SunVTS software is not installed, you can obtain the installation

packages from the following places:

■

Solaris Operating System DVDs

■

Download from the web. Refer to the Preface for information on how to access
the web site.

▼ Start the SunVTS Browser Environment

For information about test options and prerequisites, refer to the SunVTS 7.0 User’s
Guide.

Note –

SunVTS software can be run in several modes. You must perform this

procedure using the default mode.

1. Start the SunVTS agent and Javabridge on the server.

2. At the interface prompt, choose C to start the SunVTS client.

% pkginfo -l SUNWvts SUNWvtsmn SUNWvtsr SUNWvtss SUNWvtsts

CODE EXAMPLE:

Missing Package Errors for SunVTS Software

ERROR: information for "SUNWvts" was not found

ERROR: information for "SUNWvtsr" was not found

...

# cd /usr/sunvts/bin

# ./startsunvts