Servicing field-replaceable units, Servicing the front bezel, Related information – FUJITSU SPARC T5440 User Manual
Page 141
115
Servicing Field-Replaceable Units
These topics describe how to service field-replaceable units (FRUs) in the SPARC
Enterprise T5440 server.
Note –
The procedures in this chapter must be performed by a qualified service
technician.
Servicing the Front Bezel
You must remove the front bezel in order to service the DVD-ROM drive.
Related Information
■
“Servicing the DVD-ROM Drive” on page 118
Topic
Links
Remove and install field-replaceable
components.
“Servicing the Front Bezel” on page 115
“Servicing the DVD-ROM Drive” on page 118
“Servicing the Service Processor” on page 120
“Servicing the IDPROM” on page 123
“Servicing the Battery” on page 125
“Servicing the Power Distribution Board” on
page 126
“Servicing the Fan Tray Carriage” on page 129
“Servicing the Hard Drive Backplane” on page 132
“Servicing the Motherboard” on page 135
“Servicing the Flex Cable Assembly” on page 140
“Servicing the Front Control Panel” on page 144
“Servicing the Front I/O Board” on page 146
Exploded views of FRUs