FUJITSU SPARC T5440 - Manual (Page 105)

Servicing Customer-Replaceable Units 79
FIGURE: Installing a Hard Drive
3. Close the latch to lock the drive in place.
4. If you performed any additional service procedures, see “Power On the Server”
on page 153 .
Hard Drive Device Identifiers
TABLE: Physical Drive Locations, FRU Names, and Default Drive Path Names on
page 79
lists physical drive locations and their corresponding default path names in
OpenBoot PROM and Solaris for the SPARC Enterprise T5440 server.
Note – Hard drive names in ILOM messages are displayed with the full FRU name,
such as /SYS/HDD0.
TABLE: Physical Drive Locations, FRU Names, and Default Drive Path Names
Device Device Identifier OpenBoot PROM/Solaris Default Drive Path Name
HDD0 /SYS/HDD0 c0::dsk/d1t0d0
HDD1 /SYS/HDD1 c0::dsk/d1t1d0
HDD2 /SYS/HDD2 c0::dsk/d1t2d0
HDD3 /SYS/HDD3 c0::dsk/d1t3d0