FUJITSU SPARC T5440 - Manual (Page 51)

Managing Faults 25
▼ Display Individual Component Information With
the ILOM show Command
Use the show command to display information about individual components in the
server.
● At the -> prompt, enter the show command.
In CODE EXAMPLE: show Command Output on page 25 , the show command is
used to get information about a memory module (FB-DIMM).
/SYS/MB/PCIE2/ | component_state | Enabled
/SYS/MB/PCIE5/ | component_state | Enabled
/SYS/MB/NET0 | component_state | Enabled
/SYS/MB/NET1 | component_state | Enabled
/SYS/MB/NET2 | component_state | Enabled
/SYS/MB/NET3 | component_state | Enabled
/SYS/MB/PCIE | component_state | Enabled
CODE EXAMPLE: show Command Output
-> show /SYS/MB/CPU0/CMP0/BR1/CH0/D0
/SYS/MB/CPU0/CMP0/BR1/CH0/D0
Targets:
R0
R1
SEEPROM
SERVICE
PRSNT
T_AMB
Properties:
type = DIMM
component_state = Enabled
fru_name = 1024MB DDR2 SDRAM FB-DIMM 333 (PC2 5300)
fru_description = FBDIMM 1024 Mbyte
fru_manufacturer = Micron Technology
fru_version = FFFFFF
fru_part_number = 18HF12872FD667D6D4
fru_serial_number = d81813ce
fault_state = OK
clear_fault_action = (none)
CODE EXAMPLE: Output of the show components Command Showing Disabled Components (Continued)