FUJITSU SPARC T5440 - Manual (Page 85)

59
Preparing to Service the System
These topics describe how to prepare the SPARC Enterprise T5440 for servicing.
Related Information
■ “Managing Faults” on page 9
■ “Servicing Customer-Replaceable Units” on page 71
■ “Servicing Field-Replaceable Units” on page 115
■ “Returning the Server to Operation” on page 149
Safety Information
This section describes important safety information that you need to know prior to
removing or installing parts in the SPARC Enterprise T5440 server.
Topic Links
Observe proper safety practices. “Safety Information” on page 59
Gather the tools needed to perform service
procedures. “Required Tools” on page 62
Obtain the chassis serial number. “Obtain the Chassis Serial Number” on
page 62
Power off the system. “Powering Off the System” on page 63
Slide the server out of the equipment rack. “Extending the Server to the Maintenance
Position” on page 65
Remove the server from the equipment rack. “Removing the Server From the Rack” on
page 67
Remove the top cover to access internal
components. “Removing the Top Cover” on page 69