FUJITSU SPARC T5440 - Manual (Page 175)

149
Returning the Server to Operation
These topics describe how to return the SPARC Enterprise T5440 and SPARC
Enterprise T5440 servers to operation after you have performed service procedures.
Caution – Never attempt to run the server with the cover removed. Hazardous
voltage is present.
Caution – Equipment damage could occur if you run the server with the cover
removed. The cover must be in place for proper air flow.
Related Information
■ “Preparing to Service the System” on page 59
■ “Servicing Customer-Replaceable Units” on page 71
■ “Servicing Field-Replaceable Units” on page 115
Topic Links
Install the top cover after servicing internal
components. “Install the Top Cover” on page 150
Re-attach the server to the cabinet slide rails
after performing a bench procedure. “Install the Server Into the Rack” on
page 150
Slide the server back into the equipment
rack. “Slide the Server Into the Rack” on page 151
Re-attach power cords and data cables to the
back panel of the server. “Connect the Power Cords to the Server” on
page 153
Power on the server after performing a
service procedure. “Power On the Server” on page 153