Install a cmp/memory module – FUJITSU SPARC T5440 User Manual

Page 126

100

SPARC Enterprise T5440 Server Service Manual • July 2009

FIGURE:

Removing a CMP Module

3. Slide the module up and out of the system.

4. Place the module on an antistatic mat.

▼ Install a CMP/Memory Module

Note –

If you are replacing a faulty CMP or memory module, you must transfer the

FB-DIMMs on the faulty module to the replacement module. Replacement
CMP/memory modules do not include FB-DIMMs.

For more information about installing FB-DIMMs, see

1. Identify the correct slot for installation.