HP Virtual Connect Enterprise Manager Software Instruction Manuals and User Guides
We have 15 Instruction Manuals and User Guides for Virtual Connect Enterprise Manager Software HP
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 136 |
| Size: | 4.72 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 6.3 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- Mixed Virtual Connect firmware versions and compatibility in a VC Domain Group
- Virtual Connect 3.15 features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual connect firmware 3.10, 3.0x, 2.3x, and 2.1x
- Virtual Connect 3.10 features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 3.0x, 2.3x and 2.1x
- Virtual Connect 3.0x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x and 2.3x
- Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x
- VC Domain tasks
- VCEM cabinet licensing
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in Virtual Connect Manager that might affect completing VC Domain Maintenance
- Working with HP Virtual Connect 8Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules in interconnect bays one or two with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and Virtual Connect logs
- 5 Managing server profiles
- Creating a server profile
- Creating multiple server profiles
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Assigning a server profile
- Unassigning a server profile
- Copying and assigning a server profile to a bay
- Moving a server profile
- Exporting a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding custom MAC address ranges
- Editing custom MAC address ranges
- Removing custom MAC address ranges
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Creating VCEM exclusion ranges for a federated-CMS environment
- Deleting WWN exclusion ranges
- Allocating WWN addresses
- Reclaiming external WWN addresses
- Adding custom WWN address ranges
- Editing custom WWN address ranges
- Deleting custom WWN address ranges
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading Virtual Connect firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Adding or removing VC modules to VC Domain Group Configuration
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- Virtual Connect Manager does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot access VC Domain from Virtual Connect Manager after a data migration has been performed
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Uninstalling VCEM
- Backing up and restoring VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- Cannot change the MAC/WWN/Serial Number ranges in Virtual Connect Manager when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replace VC modules in a VC Domain managed by VCEM
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through Virtual Connect Manager
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- VC Domain Maintenance operation fails when moving Ethernet networks (VLANs tagged) from a deleted shared uplink set to another
- 14 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 111 |
| Size: | 2.60 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager
- Table of Contents
- About this document
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- Mixed Virtual Connect firmware versions and firmware compatibility in a VC Domain Group
- Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x
- Virtual Connect 2.1x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.0x
- VC Domain tasks
- Licensing an enclosure for VCEM
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- VC Domain Group configuration replicated to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in Virtual Connect Manager that might affect completing VC Domain Maintenance
- Working with HP Virtual Connect 8Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Requirements for adding a VC Domain to a VC Domain Group
- VC Domains
- 4 Managing VC Domain Groups
- VC Domain Groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Group page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group Firmware Mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in HP SIM and Virtual Connect logs
- VC Domain Groups
- 5 Managing server profiles
- Profiles
- Creating a profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a profile
- Editing a profile
- Verifying the presence of EFI partition data
- Assigning a profile
- Unassigning a profile
- Copying and assigning a profile to a bay
- Moving a profile
- Performing a VC Profile Failover
- Profiles
- 6 Managing bays
- 7 Managing MAC and WWN addresses
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading Virtual Connect firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Command Line Interface usage in VCEM
- 13 Troubleshooting VCEM
- Troubleshooting
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- Virtual Connect Manager does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot access VC Domain from Virtual Connect Manager after a data migration has been performed
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- VC Domain displays Expired License status
- Error on database operation occurs
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Uninstalling VCEM
- Backing up and restoring VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- Cannot change the MAC/WWN/Serial Number ranges in Virtual Connect Manager when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replace VC modules in a VC Domain managed by VCEM
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After VC Domain is removed from VC Domain Group in VCEM, profile with external-managed status cannot be edited through Virtual Connect Manager
- Server profile edit operation fails when target server is powered on
- Server profile network connections that use multiple networks are not working
- Server profile network configuration was lost
- VC Domain status is "Mismatch Configuration" after cancel VC Domain Maintenance operation fails
- Server profile job completed with success but changes have not occurred
- VCEM getting started online help screen does not appear automatically at HP SIM login
- HP SIM customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the HP SIM server has been lost"
- VC Domain not discovered by HP SIM
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- VC Domain Maintenance operation fails when moving Ethernet networks (VLANs tagged) from a deleted shared uplink set to another
- Troubleshooting
- 14 HP services and technical support
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 194 |
| Size: | 7.32 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.2 Update 2 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- Understanding VCEM and VC firmware version compatibility
- Preparing for a VCEM installation
- Installation prerequisites
- Installing VCEM
- Updating VC firmware
- Removing VCEM
- Performing post-installation configuration tasks
- Installing VCEM in an HA-clustered CMS configuration in a Microsoft Cluster Server cluster
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- VC 4.1x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 4.0x
- VC 4.0x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.7
- VC 3.7x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.5x and 3.6x
- VC 3.7x, 3.6x and 3.5x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC 3.5x feature that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC Domain tasks
- VCEM licensing
- Preparing to create a VC Domain Group
- Creating a VC Domain Group
- Defining Roles-Based Access Control (RBAC)
- Adding a VC Domain to a VC Domain Group
- Moving a VC Domain containing server profiles to a different VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in VCM that might affect completing VC Domain Maintenance
- Viewing VC Domain details
- Using VLAN capacity
- Working with HP Virtual Connect 8 Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Replacing the HP 1/10 Gb VC-Enet or the HP 1/10 Gb-Enet modules
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Upgrading to an HP Virtual Connect 8 Gb, 24-port FC module or an HP VC 8 Gb 20-port FC module
- Upgrading or removing an HP Virtual Connect Flex-10 module or an HP Virtual Connect FlexFabric module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Support of the CMS Reconfigure Tool
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Displaying VC Domain Group detail tabs
- Adding or removing VC modules in a VC Domain Group
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and VC logs
- 5 Managing server profiles
- Creating a server profile
- Concealing unused FlexNICS
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Viewing server profile attributes and status
- Using flexible server profile listings
- Recovering server profiles from an unreachable enclosure
- Extending mapped networks
- Verifying the presence of EFI partition data
- Assigning a server profile
- Unassigning a server profile
- Copying a server profile
- Moving a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding a custom MAC address range
- Editing a custom MAC address range
- Removing a custom MAC address range
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Address management tasks
- Using VCEM subranges in a federated CMS environment
- Transferring all managed VC Domains from one VCEM instance to another
- Transferring one managed VC Domain from one VCEM instance to another
- Consolidating multiple VCEM instances into a single VCEM instance
- Displaying factory default MAC and WWN addresses
- Deleting WWN exclusion ranges
- Reclaiming external WWN addresses
- Adding a custom WWN address range
- Editing a custom WWN address range
- Deleting a custom WWN address range
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading VC firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- Managing VC domains with Expanded VLAN capacity enabled
- Using iSCSI boot configuration with IE10 in compatibility view
- Cannot resynchronize VC Domain that has a configuration mismatch state due to an enabled VC feature
- Updating VC firmware versions in a VC Domain to be compatible with VC 3.7x or later
- General
- VCEM performance
- VC Domain Groups and VC Domain Management
- Jobs
- Server power management
- Server profile operations
- VC Profile Failover
- Profile operations fail, and the error message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Error popup appears when you select HP predefined ranges during remove VC Domain from group or delete VC Domain Group operations
- VCM shows an incorrect address for VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Duplicate MAC and WWN address assignments
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- VCM does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operations fail in a VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain with a server profile to a VC Domain Group fails
- Removing VCEM
- Backing up and restoring VCEM
- Cannot change the MAC/WWN/Serial Number ranges in VCM when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replacing VC modules
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through VCM
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- Profiles fail to boot from Direct Attached SAN Fabric after relocation to another enclosure
- 14 Support and other resources
- 15 Documentation feedback
- A VCEM subranges
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 79 |
| Size: | 2.18 MB |
Show table of contents
Document Outline
- HP Insight Control Server Migration 7.0 User Guide
- Part I Overview and concepts
- Part II Pre-migration tasks
- Part III Migration
- 6 Preparing the source server and deploying the Source Agent
- Verifying Windows source server requirements
- Verifying Linux source server requirements
- Uninstalling guest tools
- Choosing server migration Agents
- Deploying server migration Agents
- Manually running server migration Source Agents on source servers
- Detecting, stopping, or restarting a remotely deployed server migration Source Agent
- 7 Preparing the destination server and deploying the destination agent
- Prerequisites
- Linux destination size requirement
- Booting the destination server
- Booting a physical destination server manually using the Insight Control server migration ProLiant Boot CD ISO for X2P migrations
- Booting a physical destination server automatically using the migration wizard
- Manually creating and booting a virtual destination server
- Automatically creating and booting a virtual destination server
- 8 Migrating the servers
- 9 Post-migration tasks
- 6 Preparing the source server and deploying the Source Agent
- Part IV Troubleshooting and support
- 10 Troubleshooting
- User interface
- Source preparation
- Corrective action is required before this server can be migrated
- Source server identification fails
- Migration Agent deployment fails
- Server migration Source Agent deployment fails remotely from a Windows Server 2003 Application Station
- Linux Source Agent window does not appear on RHEL 64-bit
- Remote deployment of Linux Source Agent using non-root credentials fails
- Incorrect LUN size detected in step 2 of the migration wizard
- Migrating a source server fails with the Microsoft Hyper-V role enabled
- Destination preparation
- Destination server identification fails
- IP address configuration fails on a manually booted virtual machine in Microsoft Hyper-V for a P2V or a V2V migration
- Kernel panic occurs when booting a virtual machine to the Insight Control server migration Virtual Machine Boot CD ISO
- Mouse does not work on a virtual machine booted with the Insight Control server migration Virtual Machine Boot CD ISO
- Primary array controller does not have logical drives defined
- Primary controller configured in the system does not have drives attached
- Primary controller in system is not supported by this version of Insight Control server migration
- The destination server displays a blank screen when booting to server migration Boot CD ISO
- Some storage volumes on the destination server are not available for selection
- Static IP address cannot be assigned on the destination server while booting using the Boot CD ISO
- Supported storage controllers display Unknown on the Boot CD ISO
- Auto booting destination physical server fails
- Insight Control might not detect virtual machines on mapped network drives
- Destination server does not boot when automatic boot option was chosen during X2P migrations
- Insight Control server migration stops responding during auto-booting of Microsoft Hyper-V virtual machine
- Application station fails to connect to the destination server when the server is auto-booted for an X2P migration
- Warning message is not displayed for unsupported servers when started using the Insight Control server migration ProLiant Boot CD
- Microsoft Windows 2008 OS migration results in a blue screen error on destination server configured with NC551m FCoE card
- Migration process
- Drivers cannot be installed or injected onto boot disk
- Large volumes fail with server thread error
- Migrating a Linux source server with very large storage fails when the migration is initiated
- Linux migration might fail when X Windows configuration is not properly formatted
- Partitions created with third-party partitioning tools do not show proper file system type in the server migration wizard
- Migration hangs if source server is shut down
- NTFS resize error message
- ReiserFS volumes are blocked for Linux migration
- The File System on Source Disk \\.\PhysicalDrive0, Partition 0 Could Not Be Resized During the Migration
- Migration fails during the disk cloning phase
- Failed: Drivers Could Not Be Injected Into Boot Disk in the logs
- Starting a new migration after a current migration is stopped
- Unrecoverable sector-read errors on the source server hard drive are not supported and fail a Windows P2P or P2V migration
- Source Agent fails to launch when source server reboots in migration agent mode
- Error during data copy of Linux migration
- SAN-connected destination server displays blue screen
- Out of memory error occurs on the application station during migration
- Destination server boots with an invalid IP address
- Windows server migration Source Agent or PINT remote deployment fails with Agent is already deployed or not required error
- Windows server migration Source Agent or PINT remote deployment is intermittent and deployment fails with General failure occurred error
- Post-migration
- Migration does not start after confirmation. The event log continuously displays Operation Migration waiting for connection to source
- Destination server mouse and keyboard do not work after a Windows migration
- USB Mouse or Keyboard Drivers Not Loaded After a X2P Windows Migration
- Mouse does not work on the destination server's iLO after a Linux X2P migration
- Mouse does not work on the destination ESX virtual machine after a V2V migration
- Drive letters are not the same in the migrated virtual machine guest after migration
- Drives do not appear on the migrated operating system
- Mouse and keyboard do not work after migrating a Microsoft Hyper-V virtual machine to a ProLiant server
- Static IP address cannot be assigned on the destination server after migration
- Virtual machine hosts Integrated Components do not install on the destination virtual machine following migration
- Exclamation point (!) appears on the NIC adapter in Device Manager on the migrated virtual machine
- Network adapter in the destination ESX virtual machine is not initialized after a V2V migration
- The destination virtual machine fail to boot after X2V migration
- While editing the settings of guest VMs created by server migration, an invalid OS ID warning appears
- Server is unresponsive during PSP installation
- Destination server still shows server migration UI but server migration Wizard shows migration completed
- Operating system is not booting up on the destination server with SAN disks
- Error displayed for missing file system while booting migrated Linux OS on the destination server
- Logical drives of HP Smart Array B110i SATA RAID Controller are removed
- 11 Support and other resources
- 10 Troubleshooting
- A Applying old server migration standalone licenses
- B Performing migrations in a Microsoft Cluster server environment
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 113 |
| Size: | 1001 KB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.2 Update 2 Command Line Interface User Guide
- Contents
- 1 Getting started
- 2 Using the VCEMCLI
- 3 Using VCEM commands
- add profile
- set profile
- assign profile
- export profiles
- move profile
- remove profile
- unassign profile
- add enet-connection
- set enet-connection
- remove enet-connection
- add fc-connection
- set fc-connection
- remove fc-connection
- add fcoe-connection
- set fcoe-connection
- remove fcoe-connection
- add iscsi-connection
- set iscsi-connection
- remove iscsi-connection
- set iscsi-boot-param
- remove iscsi-boot-param
- add server-port-map
- set server-port-map
- remove server-port-map
- add server-port-map-range
- remove server-port-map-range
- poweroff devicebay
- poweron devicebay
- show power-status
- show job
- show version
- show vcem-status
- startvcdfwupdate
- completevcdfwupdate
- startvcdmaint
- cancelvcdmaint
- completevcdmaint
- 4 Error messages
- 5 Troubleshooting the VCEMCLI
- VCEMCLI calls result in access denied errors
- VCEMCLI calls result in errors for invalid leading character or invalid characters
- VCEMCLI calls result in 404 errors
- API timeouts occur
- High CPU usage on the CMS server while running a VCEMCLI client
- Job reports a failed status
- Completed with a warning job status
- Unable to assign a profile to a domain group
- VC Domain reports configuration mismatch status
- VC Domain reports expired license status
- Error occurs on a database operation
- VCEM operation failed to execute because VC firmware is not supported
- Creating a server profile fails
- Server profile edit operation fails when the target server is powered on
- Server profile job completed with success but changes have not occurred
- After a server profile assignment, some connections defined in the server profile are not functional
- Error message for the -add profile or -set profile command occurs
- Error message for the -add profile command
- Unexpected results from non-blocked (-nb) commands
- Additional troubleshooting information and tools
- 6 Support and other resources
- 7 Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 129 |
| Size: | 3.91 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 6.2 User Guide
- Table of Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- Mixed Virtual Connect firmware versions and compatibility in a VC Domain Group
- Virtual Connect 3.10 features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 3.0x, 2.3x and 2.1x
- Virtual Connect 3.0x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x and 2.3x
- Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x
- VC Domain tasks
- VCEM cabinet licensing
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in Virtual Connect Manager that might affect completing VC Domain Maintenance
- Working with HP Virtual Connect 8Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and Virtual Connect logs
- 5 Managing server profiles
- Creating a server profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Assigning a server profile
- Unassigning a server profile
- Copying and assigning a server profile to a bay
- Moving a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding custom MAC address ranges
- Editing custom MAC address ranges
- Removing custom MAC address ranges
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Deleting WWN exclusion ranges
- Allocating WWN addresses
- Reclaiming external WWN addresses
- Adding custom WWN address ranges
- Editing custom WWN address ranges
- Deleting custom WWN address ranges
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading Virtual Connect firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Command Line Interface usage in VCEM
- 13 Troubleshooting VCEM
- MAC, WWN, and Serial Number management
- Adding or removing VC modules to VC Domain Group Configuration
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- Virtual Connect Manager does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot access VC Domain from Virtual Connect Manager after a data migration has been performed
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving expired License status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Uninstalling VCEM
- Backing up and restoring VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- Cannot change the MAC/WWN/Serial Number ranges in Virtual Connect Manager when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replace VC modules in a VC Domain managed by VCEM
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through Virtual Connect Manager
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- VC Domain Maintenance operation fails when moving Ethernet networks (VLANs tagged) from a deleted shared uplink set to another
- 14 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 195 |
| Size: | 6.93 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.3 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- Understanding VCEM and VC firmware version compatibility
- Preparing for a VCEM installation
- Installation prerequisites
- Installing VCEM
- Updating VC firmware
- Removing VCEM
- Performing post-installation configuration tasks
- Installing VCEM in an HA-clustered CMS configuration in a Microsoft Cluster Server cluster
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- VC 4.1x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 4.0x
- VC 4.0x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.7
- VC 3.7x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.5x and 3.6x
- VC 3.7x, 3.6x and 3.5x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC 3.5x feature that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC Domain tasks
- VCEM licensing
- Preparing to create a VC Domain Group
- Creating a VC Domain Group
- Defining Roles-Based Access Control (RBAC)
- Adding a VC Domain to a VC Domain Group
- Moving a VC Domain containing server profiles to a different VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in VCM that might affect completing VC Domain Maintenance
- Viewing VC Domain details
- Using VLAN capacity
- Working with HP Virtual Connect 8 Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Replacing the HP 1/10 Gb VC-Enet or the HP 1/10 Gb-Enet modules
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Upgrading to an HP Virtual Connect 8 Gb, 24-port FC module or an HP VC 8 Gb 20-port FC module
- Upgrading or removing an HP Virtual Connect Flex-10 module or an HP Virtual Connect FlexFabric module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Support of the CMS Reconfigure Tool
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Displaying VC Domain Group detail tabs
- Adding or removing VC modules in a VC Domain Group
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and VC logs
- 5 Managing server profiles
- Creating a server profile
- Concealing unused FlexNICS
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Viewing server profile attributes and status
- Using flexible server profile listings
- Recovering server profiles from an unreachable enclosure
- Extending mapped networks
- Verifying the presence of EFI partition data
- Assigning a server profile
- Unassigning a server profile
- Copying a server profile
- Moving a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding a custom MAC address range
- Editing a custom MAC address range
- Removing a custom MAC address range
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Address management tasks
- Using VCEM subranges in a federated CMS environment
- Transferring all managed VC Domains from one VCEM instance to another
- Transferring one managed VC Domain from one VCEM instance to another
- Consolidating multiple VCEM instances into a single VCEM instance
- Displaying factory default MAC and WWN addresses
- Deleting WWN exclusion ranges
- Reclaiming external WWN addresses
- Adding a custom WWN address range
- Editing a custom WWN address range
- Deleting a custom WWN address range
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading VC firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- Deleting a large number of assigned profiles results in a timeout
- Managing VC domains with Expanded VLAN capacity enabled
- Using iSCSI boot configuration with IE10 in compatibility view
- Cannot resynchronize VC Domain that has a configuration mismatch state due to an enabled VC feature
- Updating VC firmware versions in a VC Domain to be compatible with VC 3.7x or later
- General
- VCEM performance
- VC Domain Groups and VC Domain Management
- Jobs
- Server power management
- Server profile operations
- VC Profile Failover
- Profile operations fail, and the error message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Error popup appears when you select HP predefined ranges during remove VC Domain from group or delete VC Domain Group operations
- VCM shows an incorrect address for VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Duplicate MAC and WWN address assignments
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- VCM does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operations fail in a VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain with a server profile to a VC Domain Group fails
- Removing VCEM
- Backing up and restoring VCEM
- Cannot change the MAC/WWN/Serial Number ranges in VCM when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replacing VC modules
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through VCM
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- Profiles fail to boot from Direct Attached SAN Fabric after relocation to another enclosure
- 14 Support and other resources
- 15 Documentation feedback
- A VCEM subranges
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 117 |
| Size: | 4.08 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 6.1
- Table of Contents
- About this document
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- Mixed Virtual Connect firmware versions and firmware compatibility in a VC Domain Group
- Virtual Connect 3.0x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x and 2.3x
- Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x
- VC Domain tasks
- Licensing an enclosure for VCEM
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- VC Domain Group configuration replicated to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in Virtual Connect Manager that might affect completing VC Domain Maintenance
- Working with HP Virtual Connect 8Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Requirements for adding a VC Domain to a VC Domain Group
- VC Domains
- 4 Managing VC Domain Groups
- VC Domain Groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Group page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group Firmware Mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in HP SIM and Virtual Connect logs
- VC Domain Groups
- 5 Managing server profiles
- Profiles
- Creating a profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a profile
- Editing a profile
- Verifying the presence of EFI partition data
- Assigning a profile
- Unassigning a profile
- Copying and assigning a profile to a bay
- Moving a profile
- Performing a VC Profile Failover
- Profiles
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading Virtual Connect firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Command Line Interface usage in VCEM
- 13 Troubleshooting VCEM
- Installation and configuration issues
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- Virtual Connect Manager does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Remove from VC Domain Group job is successful but with errors
- VC Domain displays Expired License status
- Uninstalling VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- HP SIM customizations for VCEM have not taken place
- VC Domain not discovered by HP SIM
- Operations issues
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- Cannot access VC Domain from Virtual Connect Manager after a data migration has been performed
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Completed with warning job status
- Error on database operation occurs
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Cannot change the MAC/WWN/Serial Number ranges in Virtual Connect Manager when there are server profiles
- Enclosure has a hardware failure and must be replaced
- Replace VC modules in a VC Domain managed by VCEM
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After VC Domain is removed from VC Domain Group in VCEM, profile with external-managed status cannot be edited through Virtual Connect Manager
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel VC Domain Maintenance operation fails
- Server profile job completed with success but changes have not occurred
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the HP SIM server has been lost"
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- VC Domain Maintenance operation fails when moving Ethernet networks (VLANs tagged) from a deleted shared uplink set to another
- Backup and Restore issues
- Installation and configuration issues
- 14 HP services and technical support
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 113 |
| Size: | 1000 KB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.2 Command Line Interface User Guide
- Contents
- 1 Getting started
- 2 Using the VCEMCLI
- 3 Using VCEM commands
- add profile
- set profile
- assign profile
- export profiles
- move profile
- remove profile
- unassign profile
- add enet-connection
- set enet-connection
- remove enet-connection
- add fc-connection
- set fc-connection
- remove fc-connection
- add fcoe-connection
- set fcoe-connection
- remove fcoe-connection
- add iscsi-connection
- set iscsi-connection
- remove iscsi-connection
- set iscsi-boot-param
- remove iscsi-boot-param
- add server-port-map
- set server-port-map
- remove server-port-map
- add server-port-map-range
- remove server-port-map-range
- poweroff devicebay
- poweron devicebay
- show power-status
- show job
- show version
- show vcem-status
- startvcdfwupdate
- completevcdfwupdate
- startvcdmaint
- cancelvcdmaint
- completevcdmaint
- 4 Error messages
- 5 Troubleshooting the VCEMCLI
- VCEMCLI calls result in access denied errors
- VCEMCLI calls result in errors for invalid leading character or invalid characters
- VCEMCLI calls result in 404 errors
- API timeouts occur
- High CPU usage on the CMS server while running a VCEMCLI client
- Job reports a failed status
- Completed with a warning job status
- Unable to assign a profile to a domain group
- VC Domain reports configuration mismatch status
- VC Domain reports expired license status
- Error occurs on a database operation
- VCEM operation failed to execute because VC firmware is not supported
- Creating a server profile fails
- Server profile edit operation fails when the target server is powered on
- Server profile job completed with success but changes have not occurred
- After a server profile assignment, some connections defined in the server profile are not functional
- Error message for the -add profile or -set profile command occurs
- Error message for the -add profile command
- Unexpected results from non-blocked (-nb) commands
- Additional troubleshooting information and tools
- 6 Support and other resources
- 7 Documentation feedback
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 159 |
| Size: | 5.62 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.1 Update 1 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- Understanding VCEM and VC firmware version compatibility
- Preparing for a VCEM installation
- Installation prerequisites
- Installing VCEM
- Updating VC firmware
- Removing VCEM
- Performing post-installation configuration tasks
- Installing VCEM in an HA-clustered CMS configuration in a Microsoft Cluster Server cluster
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- VC 3.7x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.5x and 3.6x
- VC 3.7x, 3.6x and 3.5x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC 3.5x feature that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC Domain tasks
- VCEM licensing
- Preparing to create a VC Domain Group
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in VCM that might affect completing VC Domain Maintenance
- Viewing attributes
- Using VLAN capacity
- Working with HP Virtual Connect 8 Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Replacing the HP 1/10 Gb VC-Enet or the HP 1/10 Gb-Enet modules
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Support of the CMS Reconfigure Tool
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and VC logs
- 5 Managing server profiles
- Creating a server profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Viewing server profile attributes and status
- Using flexible server profile listings
- Recovering server profiles from an unreachable enclosure
- Extending mapped networks
- Verifying the presence of EFI partition data
- Assigning a server profile
- Unassigning a server profile
- Copying a server profile
- Moving a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding a custom MAC address range
- Editing a custom MAC address range
- Removing a custom MAC address range
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Address management tasks
- Deleting WWN exclusion ranges
- Reclaiming external WWN addresses
- Adding a custom WWN address range
- Editing a custom WWN address range
- Deleting a custom WWN address ranges
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading VC firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- Cannot resynchronize VC Domain that has a configuration mismatch state due to an enabled VC feature
- Updating VC firmware versions in a VC Domain to be compatible with VC 3.70 or later
- Performing the VC Domain maintenance operations with forward-compatible VC firmware
- General
- VCEM performance
- VC Domain Groups and VC Domain Management
- Jobs
- Server power management
- Server profile operations
- VC Profile Failover
- Profile operations fail, and the error message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Error popup appears when you select HP predefined ranges during remove VC Domain from group or delete VC Domain Group operations
- VCM shows an incorrect address for VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Duplicate MAC and WWN address assignments
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- VCM does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operations fail in a VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Removing VCEM
- Backing up and restoring VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- Cannot change the MAC/WWN/Serial Number ranges in VCM when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replacing VC modules
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through VCM
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- Profiles fail to boot from Direct Attached SAN Fabric after relocation to another enclosure
- 14 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 150 |
| Size: | 5.76 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.0 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- Mixed Virtual Connect firmware versions and compatibility in a VC Domain Group
- Virtual Connect 3.3x features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 3.15 – 3.18, 3.10, 3.0x, 2.3x, and 2.1x
- Virtual Connect 3.15 features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 3.10, 3.0x, 2.3x, and 2.1x
- Virtual Connect 3.10 features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 3.0x, 2.3x and 2.1x
- Virtual Connect 3.0x features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 2.1x and 2.3x
- Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 2.1x
- VC Domain tasks
- VCEM licensing
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in Virtual Connect Manager that might affect completing VC Domain Maintenance
- Using VLAN capacity
- Working with HP Virtual Connect 8Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules in interconnect bays one or two with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Using the password CMS reconfigure tool
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and Virtual Connect logs
- 5 Managing server profiles
- Creating a server profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Extending mapped networks
- Verifying the presence of EFI partition data
- Assigning a server profile
- Unassigning a server profile
- Copying a server profile
- Moving a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding a custom MAC address range
- Editing custom MAC address ranges
- Removing a custom MAC address range
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Address management tasks
- Deleting WWN exclusion ranges
- Reclaiming external WWN addresses
- Adding custom WWN address ranges
- Editing custom WWN address ranges
- Deleting custom WWN address ranges
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading Virtual Connect firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- General
- Warning dialogs are not translated into Japanese
- VCEM performance
- VC Domain Groups and VC Domain Management
- Jobs
- Server power management
- Server profile operations
- VC Profile Failover
- Profile operations fail, and the error message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Error popup appears when you select HP predefined ranges during remove VC Domain from group or delete VC Domain Group operations
- Unable to complete or cancel VC Domain maintenance after enabling Expanded VLAN Capacity in VC Domains
- No error message when assigning a profile to a server with two FlexNIC ports on the same physical NIC
- VCM shows an incorrect address for VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Duplicate MAC and WWN address assignments
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- Virtual Connect Manager does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Removing VCEM
- Backing up and restoring VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- Cannot change the MAC/WWN/Serial Number ranges in Virtual Connect Manager when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replace VC modules in a VC Domain managed by VCEM
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through Virtual Connect Manager
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- VC Domain Maintenance operation fails when moving Ethernet networks (VLANs tagged) from a deleted shared uplink set to another
- 14 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 152 |
| Size: | 5.87 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 6.3.1 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- Mixed Virtual Connect firmware versions and compatibility in a VC Domain Group
- Virtual Connect 3.3x features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 3.15 – 3.19, 3.10, 3.0x, 2.3x, and 2.1x
- Virtual Connect 3.15 features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual connect firmware 3.10, 3.0x, 2.3x, and 2.1x
- Virtual Connect 3.10 features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 3.0x, 2.3x and 2.1x
- Virtual Connect 3.0x features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 2.1x and 2.3x
- Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of a VC Domain Group with Virtual Connect firmware 2.1x
- VC Domain tasks
- VCEM licensing
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in Virtual Connect Manager that might affect completing VC Domain Maintenance
- Using VLAN capacity
- Working with HP Virtual Connect 8Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules in interconnect bays one or two with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and Virtual Connect logs
- 5 Managing server profiles
- Creating a server profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Assigning a server profile
- Unassigning a server profile
- Copying a server profile
- Moving a server profile
- Exporting a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding a custom MAC address range
- Editing custom MAC address ranges
- Removing a custom MAC address range
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Creating VCEM exclusion ranges for a federated-CMS environment
- Transferring managed VC domains from one VCEM instance to another
- Consolidating multiple VCEM instances into a single VCEM instance
- Deleting WWN exclusion ranges
- Reclaiming external WWN addresses
- Adding custom WWN address ranges
- Editing custom WWN address ranges
- Deleting custom WWN address ranges
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading Virtual Connect firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- General
- Warning dialogs are not translated into Japanese
- VCEM performance
- Managing VC Domain firmware 3.30 after installing or upgrading to VCEM 6.3
- Resolving removal of the last VC Domain from a VC Domain Group
- VC Domain Groups and VC Domain Management
- Jobs
- Server power management
- Server profile operations
- VC Profile Failover
- Profile operations fail, and the error message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Error popup appears when you select HP predefined ranges during remove VC Domain from group or delete VC Domain Group operations
- Unable to complete or cancel VC Domain Maintenance after enabling Expanded VLAN Capacity in VC Domain
- No error message when assigning a profile to a server with two FlexNIC ports on the same physical NIC
- VCM shows an incorrect address for VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Duplicate MAC and WWN address assignments
- Adding or removing VC modules to VC Domain Group Configuration
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- Virtual Connect Manager does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot access VC Domain from Virtual Connect Manager after a data migration has been performed
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Uninstalling VCEM
- Backing up and restoring VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- Cannot change the MAC/WWN/Serial Number ranges in Virtual Connect Manager when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replace VC modules in a VC Domain managed by VCEM
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through Virtual Connect Manager
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- VC Domain Maintenance operation fails when moving Ethernet networks (VLANs tagged) from a deleted shared uplink set to another
- 14 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 96 |
| Size: | 916 KB |
Show table of contents
Document Outline
- HP Insight Management Virtual Connect Enterprise Manager
- Contents
- 1 Getting Started
- 2 Using VCEMCLI
- 3 Using VCEM commands
- add profile
- set profile
- assign profile
- export profiles
- unassign profile
- add enet-connection
- set enet-connection
- remove enet-connection
- add fc-connection
- set fc-connection
- remove fc-connection
- add fcoe-connection
- set fcoe-connection
- remove fcoe-connection
- add iscsi-connection
- set iscsi-connection
- remove iscsi-connection
- set iscsi-boot-param
- remove iscsi-boot-param
- add server-port-map
- set server-port-map
- remove server-port-map
- poweroff devicebay
- poweron devicebay
- show power-status
- show job
- show version
- show vcem-status
- startvcdmaint
- cancelvcdmaint
- completevcdmaint
- 4 Error messages
- 5 Troubleshooting VCEMCLI
- VCEMCLI calls result in access denied errors
- VCEMCLI calls result in errors for invalid leading character or invalid characters
- VCEMCLI calls result in 404 errors
- API timeouts
- High CPU usage on the CMS server while running a VCEMCLI client
- Job reports failed status
- Completed with warning job status
- Unable to assign a profile to a Domain Group
- VC Domain reports Configuration Mismatch status
- VC Domain reports Expired License status
- Error on database operation occurs
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile fails
- Server profile edit operation fails when target server is powered on
- Server profile job completed with success but changes have not occurred
- After a server profile assignment, some connections defined in the server profile are not functional
- Commands -add profile or -set profile error messages
- Command -add profile error messages
- Additional Troubleshooting Information and tools
- 6 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 189 |
| Size: | 6.67 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.2 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- Understanding VCEM and VC firmware version compatibility
- Preparing for a VCEM installation
- Installation prerequisites
- Installing VCEM
- Updating VC firmware
- Removing VCEM
- Performing post-installation configuration tasks
- Installing VCEM in an HA-clustered CMS configuration in a Microsoft Cluster Server cluster
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- VC 4.0x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.7
- VC 3.7x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.5x and 3.6x
- VC 3.7x, 3.6x and 3.5x features that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC 3.5x feature that must be disabled in a VC Domain to be part of a VC Domain Group with VC firmware 3.3x
- VC Domain tasks
- VCEM licensing
- Preparing to create a VC Domain Group
- Creating a VC Domain Group
- Defining Roles-Based Access Control (RBAC)
- Adding a VC Domain to a VC Domain Group
- Moving a VC Domain containing server profiles to a different VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in VCM that might affect completing VC Domain Maintenance
- Viewing VC Domain details
- Using VLAN capacity
- Working with HP Virtual Connect 8 Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Replacing the HP 1/10 Gb VC-Enet or the HP 1/10 Gb-Enet modules
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Upgrading to an HP Virtual Connect 8 Gb, 24-port FC module or an HP VC 8 Gb 20-port FC module
- Upgrading or removing an HP Virtual Connect Flex-10 module or an HP Virtual Connect FlexFabric module
- Upgrading to an HP Virtual Connect FlexFabric module from a VC-FC module
- Support of the CMS Reconfigure Tool
- Requirements for adding a VC Domain to a VC Domain Group
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Displaying VC Domain Group detail tabs
- Adding or removing VC modules in a VC Domain Group
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and VC logs
- 5 Managing server profiles
- Creating a server profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Viewing server profile attributes and status
- Using flexible server profile listings
- Recovering server profiles from an unreachable enclosure
- Extending mapped networks
- Verifying the presence of EFI partition data
- Assigning a server profile
- Unassigning a server profile
- Copying a server profile
- Moving a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding a custom MAC address range
- Editing a custom MAC address range
- Removing a custom MAC address range
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Address management tasks
- Using VCEM subranges in a federated CMS environment
- Transferring all managed VC Domains from one VCEM instance to another
- Transferring one managed VC Domain from one VCEM instance to another
- Consolidating multiple VCEM instances into a single VCEM instance
- Displaying factory default MAC and WWN addresses
- Deleting WWN exclusion ranges
- Reclaiming external WWN addresses
- Adding a custom WWN address range
- Editing a custom WWN address range
- Deleting a custom WWN address range
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading VC firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- Using iSCSI boot configuration with IE10 in compatibility view
- Cannot resynchronize VC Domain that has a configuration mismatch state due to an enabled VC feature
- Updating VC firmware versions in a VC Domain to be compatible with VC 3.7x or later
- General
- VCEM performance
- VC Domain Groups and VC Domain Management
- Jobs
- Server power management
- Server profile operations
- VC Profile Failover
- Profile operations fail, and the error message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Error popup appears when you select HP predefined ranges during remove VC Domain from group or delete VC Domain Group operations
- VCM shows an incorrect address for VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Duplicate MAC and WWN address assignments
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- VCM does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operations fail in a VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain with a server profile to a VC Domain Group fails
- Removing VCEM
- Backing up and restoring VCEM
- Cannot change the MAC/WWN/Serial Number ranges in VCM when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replacing VC modules
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through VCM
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- Profiles fail to boot from Direct Attached SAN Fabric after relocation to another enclosure
- 14 Support and other resources
- 15 Documentation feedback
- A VCEM subranges
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 147 |
| Size: | 5.87 MB |
Show table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 7.1 User Guide
- Contents
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- VC Domain tasks
- VCEM licensing
- Preparing to create a VC Domain Group
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- Replicating VC Domain Group configurations to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in VCM that might affect completing VC Domain Maintenance
- Using VLAN capacity
- Working with HP Virtual Connect 8 Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Using FlexFabric modules
- Adding FlexFabric modules to an existing VCEM managed VC Domain
- Replacing VC Ethernet modules in interconnect bays one or two with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet in interconnect bays three to eight with FlexFabric in an existing VCEM managed VC Domain
- Replacing FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Replacing VC Ethernet and FC modules with FlexFabric modules in an existing VCEM managed VC Domain
- Support of the CMS Reconfigure Tool
- 4 Managing VC Domain groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Groups page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group firmware mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in Systems Insight Manager and VC logs
- 5 Managing server profiles
- Creating a server profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a server profile
- Editing a server profile
- Viewing server profile attributes and status
- Using flexible server profile listings
- Recovering server profiles from an unreachable enclosure
- Extending mapped networks
- Verifying the presence of EFI partition data
- Assigning a server profile
- Unassigning a server profile
- Copying a server profile
- Moving a server profile
- Performing a VC Server Profile Failover
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- MAC Addresses
- Tracking individual MAC addresses
- Creating MAC exclusion ranges
- Deleting MAC exclusion ranges
- Reclaiming external MAC addresses
- Adding a custom MAC address range
- Editing a custom MAC address range
- Removing a custom MAC address range
- WWN Addresses
- Tracking individual WWN addresses
- Creating WWN exclusion ranges
- Address management tasks
- Deleting WWN exclusion ranges
- Reclaiming external WWN addresses
- Adding a custom WWN address range
- Editing a custom WWN address range
- Deleting a custom WWN address ranges
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading VC firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Failover Command Line Interface Usage in VCEM
- 13 Troubleshooting VCEM
- Performing the VC Domain maintenance operations with forward-compatible VC firmware
- General
- Warning dialogs are not translated into Japanese
- VCEM performance
- VC Domain Groups and VC Domain Management
- Jobs
- Server power management
- Server profile operations
- VC Profile Failover
- Profile operations fail, and the error message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Error popup appears when you select HP predefined ranges during remove VC Domain from group or delete VC Domain Group operations
- Unable to complete or cancel VC Domain maintenance after enabling Expanded VLAN Capacity in VC Domains
- VCM shows an incorrect address for VCEM
- Communicating with the enclosure OA
- MAC, WWN, and Serial Number management
- Duplicate MAC and WWN address assignments
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- VCM does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Remove from VC Domain Group job is successful but with errors
- Resolving an expired license status
- Resolving database operation errors
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Removing VCEM
- Backing up and restoring VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- Cannot change the MAC/WWN/Serial Number ranges in VCM when there are server profiles
- VCEM database is inaccessible or irretrievable with no backup, or VCEM file systems are corrupt with no backup
- Enclosure has a hardware failure and must be replaced
- Replacing VC modules
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After a VC Domain is removed from a VC Domain Group in VCEM, a profile with external-managed status cannot be edited through VCM
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel a VC Domain Maintenance operation fails
- Server profile job completed successfully but changes have not occurred
- Systems Insight Manager customizations for VCEM have not taken place
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the Systems Insight Manager server has been lost"
- VC Domain not discovered by Systems Insight Manager
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- 14 Support and other resources
- Glossary
- Index