HP Virtual Connect Enterprise Manager Software User Manual
Page 31
Table 10 VCEM status icons (continued)
Description
Icon
Status
VCEM is unable to obtain the necessary
permissions for External Manager user.
Missing external manager
lock/Communication established with
disabled enclosure
VCEM might have lost the External
Manager lock at the VC Domain.
The VC Domain enclosure has an
expired license.
Expired license
The VC Domain is part of a VC Domain
Group and operating normally.
Managed by VCEM
The VC Domain configuration has
changed and does not match the VC
Domain Group configuration.
Configuration mismatch
VC Domain is unlocked for domain,
network, and storage changes through
Under maintenance
VCM. After completing the domain,
network, and storage changes, confirm
the new VC Domain configuration in
VCEM by exiting maintenance mode.
VCEM operations related to this VC
Domain or its VC Domain Group, such
as create server profile, move server
profile, server profile failover, and so
on, are blocked while the VC Domain
is under maintenance.
This status is displayed after a VCEM
upgrade and indicates that an
Incompatible firmware
incompatible firmware mode and
version was detected. Only the
following VCEM VC Domain operations
are permitted for resources with an
incompatible status:
•
Remove VC Domain from Group
•
Delete VC Domain Group
•
Perform VC Domain Maintenance
•
Upgrade VC Group firmware Mode
See
“Upgrading incompatible firmware
to
upgrade to a supported firmware.
The managed VC Domain is in
firmware update mode.
Firmware Update
For information on how to resolve status issues, see
“Troubleshooting VCEM” (page 156)
To display the properties of a particular VC Domain, click the VC Domain name. Properties include
the primary IP address, status, VC firmware version, Ethernet networks, Shared Uplink sets, Fibre
Channel SAN fabrics, Ethernet and Fibre Channel common settings, and SNMP Ethernet and Fibre
Channel alert destinations.
Requirements for adding a VC Domain to a VC Domain Group
To add a configured VC Domain to a VC Domain Group, the following requirements must be met:
•
Multienclosure VC Domains must be configured and match the minimum number of enclosures
required by the VC Domain Group. The Ethernet uplinks used by each enclosure define the
Requirements for adding a VC Domain to a VC Domain Group
31