HP Virtual Connect Enterprise Manager Software - Manual (Page 108)

Figure 69 Force same VLAN mappings as Shared Uplink Set options
4. Click the right-arrow to add the network to your configuration. To remove networks press the
left-arrow. You can select all the VLAN networks available, but only 162 VLAN networks are
accepted. The following message is displayed warning you about this limit.
The provided configuration for multiple networks exceeds the maximum allowed number of VNet mappings. The
maximum number of VNet mappings is [].
The 162 VLAN networks feature is made available with Extended Mapped VLAN capability
and is contained in VC Domains with VC firmware 3.30 or later.
5. Click OK to save the configuration.
NOTE: For VC firmware versions 3.5x and later, you cannot configure more than 162 VLANs
per physical function such as LOM1 or LOM2 for example. VCEM will return an error.
Configuring Network Port Speed
When creating or editing a server profile, you can configure the network speed of an Ethernet
network connection. You can select network speed parameters using the Preferred, Custom, or
Disabled options.
1.
In the Ethernet connections table, select the desired port speed from the Port Speed Setting
menu.
108 Managing server profiles