HP Virtual Connect Enterprise Manager Software User Manual
Hp virtual connect enterprise manager 6.1, User guide
Table of contents
Document Outline
- HP Virtual Connect Enterprise Manager 6.1
- Table of Contents
- About this document
- 1 Introduction
- 2 Installing and configuring VCEM
- 3 Managing VC Domains
- VC Domains
- Requirements for adding a VC Domain to a VC Domain Group
- Mixed Virtual Connect firmware versions and firmware compatibility in a VC Domain Group
- Virtual Connect 3.0x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x and 2.3x
- Virtual Connect 2.3x features that must be disabled in a VC Domain to be part of the VC Domain Group with Virtual Connect firmware 2.1x
- VC Domain tasks
- Licensing an enclosure for VCEM
- Creating a VC Domain Group
- Adding a VC Domain to a VC Domain Group
- Removing a VC Domain from a VC Domain Group
- Working with multienclosure VC Domains
- VC Domain Maintenance
- VC Domain Group configuration replicated to other VC Domains during VC Domain Maintenance
- Performing VC Domain Maintenance
- Backing up and restoring domain configurations through VC Domain Maintenance
- Changes in Virtual Connect Manager that might affect completing VC Domain Maintenance
- Working with HP Virtual Connect 8Gb Fibre Channel Module for c-Class BladeSystem
- Adding or removing remote enclosures from a multienclosure domain in VC Domain Maintenance
- Canceling a VC Domain Maintenance task
- Resynchronizing a VC Domain with Configuration Mismatch
- Requirements for adding a VC Domain to a VC Domain Group
- VC Domains
- 4 Managing VC Domain Groups
- VC Domain Groups
- Creating a VC Domain Group
- Maintaining a VC Domain from the VC Domain Group page
- Canceling a VC Domain Group maintenance task
- Upgrading VC Domain Group Firmware Mode
- Deleting a VC Domain Group
- Adding or removing VC modules to VC Domain Group configuration
- Moving Ethernet networks (VLANs tagged) from one shared uplink to another
- Correlating VCEM operations in HP SIM and Virtual Connect logs
- VC Domain Groups
- 5 Managing server profiles
- Profiles
- Creating a profile
- Configuring the target boot LUN
- Configuring multiple networks
- Configuring Network Port Speed
- Deleting a profile
- Editing a profile
- Verifying the presence of EFI partition data
- Assigning a profile
- Unassigning a profile
- Copying and assigning a profile to a bay
- Moving a profile
- Performing a VC Profile Failover
- Profiles
- 6 Managing enclosure bay assignments
- 7 Managing MAC and WWN addresses
- 8 Working with Logical Serial Numbers
- 9 Tracking VCEM job status
- 10 Upgrading Virtual Connect firmware after VCEM is managing VC Domains
- 11 Removing an external manager account
- 12 Command Line Interface usage in VCEM
- 13 Troubleshooting VCEM
- Installation and configuration issues
- VCEM is prompting for Onboard Administrator credentials on a configured VC Domain
- Virtual Connect Manager does not accept Onboard Administrator credentials
- Unable to add VC Domain to a VC Domain Group
- Unable to add an unconfigured VC Domain to a VC Domain Group
- VC Domain displays Configuration Mismatch status
- VC Domain displays Connectivity failure status
- Cannot resynchronize VC Domain that is in Configuration Mismatch state
- Remove from VC Domain Group job is successful but with errors
- VC Domain displays Expired License status
- Uninstalling VCEM
- No HP-predefined ranges for MAC and WWN addresses in VC Domain Groups
- HP SIM customizations for VCEM have not taken place
- VC Domain not discovered by HP SIM
- Operations issues
- Unauthorized error when trying to access the VCEM home page
- A job appears with Failed status
- Enclosure has two Onboard Administrators, and one fails
- Cannot access VC Domain from Virtual Connect Manager after a data migration has been performed
- Cannot manage a VC Domain when VC module failover is taking place
- VC Domain displays Missing External Manager lock status
- Operation fails to perform in the VC Domain or VC Domain Group under maintenance status
- Completed with warning job status
- Error on database operation occurs
- Errors occur while loading VCEM pages
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile or adding a VC Domain to a VC Domain Group fails
- Cannot change the MAC/WWN/Serial Number ranges in Virtual Connect Manager when there are server profiles
- Enclosure has a hardware failure and must be replaced
- Replace VC modules in a VC Domain managed by VCEM
- Failover fails to initiate with an ERROR (30) - Could not initiate failover; nested exception is: java.net.SocketTimeoutException: Read timed out
- VC Profile Failover fails during Onboard Administrator replacement
- VCEM cannot power down ProLiant server model BL465 G1
- After VC Domain is removed from VC Domain Group in VCEM, profile with external-managed status cannot be edited through Virtual Connect Manager
- Server profile edit operation fails when target server is powered on
- VC Domain status is "Mismatch Configuration" after cancel VC Domain Maintenance operation fails
- Server profile job completed with success but changes have not occurred
- After a server profile failover, some connections defined in the server profile are not functional
- Server profiles are not displaying physical port mapping and allocated bandwidth information
- VCEM page displays "Communication with the HP SIM server has been lost"
- Create VC Domain Group or Add VC Domain to VC Domain Group operations fail and the message "An invalid boot LUN was entered. Check the storage arrays for the proper LUN number" appears
- Profile move, assign, or failover operations fail and the message "An invalid boot LUN was entered. Check the Storage arrays for the proper LUN number" appears
- VC Domain Maintenance operation fails when moving Ethernet networks (VLANs tagged) from a deleted shared uplink set to another
- Backup and Restore issues
- Installation and configuration issues
- 14 HP services and technical support
- Glossary
- Index