Forward compatibility for vc firmware – HP Virtual Connect Enterprise Manager Software User Manual
Page 21
You must upgrade the VC Domain firmware and the VC Domain Group firmware mode to 3.3x
or later before you can manage those VC Domains and VC Domain Groups with VCEM 7.3.
displays VC Domain Group firmware compatibility.
Table 7 VC Domain Group firmware compatibility
VC Domain Group
firmware mode
3.3x
VC Domain Group
firmware mode
3.5x
VC Domain
Group firmware
mode 3.7x
VC Domain Group
firmware mode
4.0x
VC Domain Group
firmware mode
4.1x
VC firmware
yes
Yes
Yes
Yes
Yes
4.1x
Yes
Yes
Yes
Yes
No
4.0x
Yes
Yes
Yes
No
No
3.7x
Yes
1
Yes
No
No
No
3.5x/3.6x
Yes
1
No
No
No
No
3.30
1
If enhanced VLAN capacity is enabled for the VC Domain being added to a VC Domain Group, the VC Domain group
must also have enhanced VLAN capacity enabled.
Forward compatibility for VC firmware
VCEM enables firmware compatibility using current and future versions of VC firmware. For
example, VCEM 7.3 can support future VC firmware versions (when available) in compatibility
mode. This depends on the firmware mode of the VC Domain Group you are trying to add the VC
Domain with the newer VC firmware version into. See
“Backward compatibility for VC firmware
for more information.
Selecting HP Virtual Connect Enterprise Manager ports
Before you install VCEM, check
to ensure you have the correct ports open
to allow communication.
NOTE:
is based on the assumption that HP Virtual Connect Enterprise Manager is behind
the firewall of the CMS.
Table 8 VCEM ports
Description
Protocol
1
Port
Managed System
CMS
Out
In
Out
In
2
Communication
with VCEM
SSL
443
Y
Y
This port is
needed to
SSH
22
Y
Y
establish a
connection
through SSH
using CLI
SNMP
Agent/Poll
SNMP (UDP)
161
Y
Y
Trap listener
SNMP Trap
(UDP)
162
Y
TFTP—Used for
upload and
UDP
69
Y
configuration
backup from CLI
FTP—Used for
upload and
TCP
20, 21
Y
Installation prerequisites
21