HP Virtual Connect Enterprise Manager Software User Manual
Page 159
3.
Select one of the following options to disable IGMP No Flood:
•
From the VCM CLI—Telnet into VCM using an SSH connection such as SSH
[email protected], where xxx is the VC Domain IP address and enter set
igmp NoFlood=false
.
•
From the VCM GUI—Clear the Prevent flooding of unregistered multicast traffic check
box.
4.
Browse to the VCEM GUI and complete VC Domain Maintenance for the VC Domain.
For more information, see Customer Advisory PI51599 entitled “VCEM is unable to manage VC
3.70 Domains in compatibility mode with IGMP NoFlood enabled.”
Using Expanded VLAN capacity with the Cancel VC domain Maintenance operation
Cancelling maintenance mode in VCEM will not revert the Expanded VLAN capacity configuration
back to Legacy capacity mode.
If you enable Maintenance Mode, change Legacy capacity to Expanded VLAN capacity, and then
click Cancel VC domain Maintenance, VCEM cannot revert back to Legacy capacity mode in the
VC domain. Instead, the VC domain displays the “Under maintenance” icon and VCEM fails to
complete or cancel the maintenance operation. To resolve this, see the procedure to delete the
domain in
“Using Expanded VLAN capacity ” (page 156)
Using iSCSI boot configuration with IE10 in compatibility view
The iSCSI boot configuration web GUI is not supported in IE10 compatibility view. Use IE10 without
compatibility view to make changes to the iSCSI boot configuration.
Cannot resynchronize VC Domain that has a configuration mismatch state
due to an enabled VC feature
If VCEM failed to resynchronize a VC Domain that is in a configuration mismatch state because
there are one or more VC features enabled (see
) you will need to perform the following
steps to correct the VC Domain:
Using iSCSI boot configuration with IE10 in compatibility view
159