2 examples of servo system configurations, 1 three-phase, 200 v series, Cn3 cn1 – Yaskawa Sigma II Series SGMVH User Manual
Page 22: Outline, Sgdm/sgdh servopack, Tdata/ se e mod, Pow er
1.2 Examples of Servo System Configurations
1
Outline
1-3
1.2 Examples of Servo System Configurations
This section describes examples of basic servo system configuration.
1.2.1 Three-phase, 200 V Series
U V W
B1 B2
R S T
CN3
CN1
DB24
DU DV DW DBON
DB24
DU DV DW
DBON
Regenerative
Resistor Unit
Power supply for
cooling fan
Power supply
Three-phase 200 VAC
SGMVH
servomotor
SGDM/SGDH SERVOPACK
Host controller
Connect the SGDM/SGDH SERVOPACK
to a Yaskawa or an other manufacturer’s
host controller.
Digital Operator
Allows the user to set parameters or
operation reference and display
operation status or alarm status.
(JUSP-OP02A-2)
Cable model:
Personal computer
Hand-held type
1-meter cable included
Molded-case circuit
breaker (MCCB)
Used to protect power
supply line.
Noise filter
Used to eliminate exter-
nal noise from power
supply line.
Magnetic contactor *
Turns the servo ON or
OFF.
Brake power supply
Used for SGMVH
servomotor with brake.
LPSE-2H01
(For 200 V input)
Dynamic Brake (DB)
Unit
* Use a surge absorber
for the magnetic contactor.
Brake power supply
Dynamic Brake Unit
Used if dynamic brake
function is required for the
SERVOPACK.
Note: The Dynamic Brake (DB) Unit DBON and
DB24 terminals can be used with SERVO-
PACKs of 37 kW or more only.
MP900/MP2000 Series
JZSP-CMS01 to 03
L1/R
L2/S
L3/T
L3C/t
L1C/r
-
+1
+2
L1/R
L2/S
L3/T
U
V
W
CN2
CN3
CN1
T
DATA/
SE
E
MOD /
SERVOPACK
YASKAWA
R
O
P
E
R
A
T
O
CN3
8
CN
POW
ER
CN5
SGDH-
㧖㧖㧖㧖