HEIDENHAIN TNC 415 (259 9x0) Service Manual - Manual (Page 94)

SERVICE MANUAL TNC 415B/425
Page 89
Issue: 20.08.95
With the arrow keys the desired settings
GOTO
(operating mode, baud rate, interface allocation) can be selected and set according to your requirements by
pressing
ENT
.
To exit the MOD function RS 232/RS 422 SETUP, press the soft key .
16.2 Machine Parameters for the Data Interfaces
In the operating modes ME, FE 1, FE 2 and LSV/2 the interface parameters cannot be changed.
In the operating modes EXT 1 and EXT2 the interface parameters can be set via machine parameter
(starting with MP5000).
The detailed functions of the individual machine parameters please see from the "Technical Manual" or from
the "Description of the Data Interfaces TNC 407/415" (Id.No. 275 931 --).