HEIDENHAIN TNC 415 (259 9x0) Service Manual User Manual
Page 93
SERVICE MANUAL TNC 415B/425
Page 88
Issue: 20.08.95
16.1.1 Interface Configuration and Allocation of the
Operating Modes
In the operating modes PROGRAMMING AND EDITING and TEST RUN the setup menu for the data
interfaces is called after pressing
MOD
and the soft key
.
On the left half of the screen the RS-232-C interface is configured, on the right half the RS-422-C. On the
lower left of the screen the operating modes PROGRAMMING/EDITING, PROGRAM RUN and TEST RUN can
be allocated to either RS-232-C or RS-422-C. (If the MOD function "RS 232/RS 422 SETUP" is called in the PLC
editor or the MP editor, the editor can be allocated to one of the interfaces.)
On the lower right of the screen the user can define via PRINT or PRINT TEST, whether outputs with FN15
and digitized positions are to be output via one of the interfaces or into a file in the memory of the control.
•
RS 232 means:
Data are output via the data interface RS-232-C.
•
RS 422 means:
Data are output via the data interface RS-422-C.
•
FILE means:
Data are filed in the TNC.
Note:
In the machine parameter MP5000 individual interfaces can be disabled.