HEIDENHAIN TNC 415 (259 9x0) Service Manual - Manual (Page 115)

SERVICE MANUAL TNC 415B/425
Page 110
Issue: 20.08.95
17.4 Downloading External Data
Preparations:
•
Connect the external data medium (ME, FE or other peripheral unit) to the TNC.
•
Prepare the external data medium for data transfer:
press
STOP
,
TNC
and at the ME,
press
STOP
at the FE..
•
Select the operating mode, the baud rate and the interface assignment (see 16.1) at the TNC.
17.4.1 Downloading files with the Extensions .H, .I, .D, .P, .T, .A
Press Key Function
EXT
in interface mode FE 1
otherwise:
TNC in operating mode PROGRAMMING AND EDITING
Activate data transfer menu
Press arrow key to select screen of external data medium
Soft keys to display all file types
Press arrow key on the VDU to switch the soft key row to
display of all file types
List desired file type
Call directory of external data medium
Select file with arrow key, if required
Start data transfer
Download further files, if required
Soft key to exit data transfer menu
END
TNC in operating mode PROGRAMMING AND EDITING
*
The TOOL.T file (active tool table) must be downloaded in another operating mode
(see section 17.4.2).