HEIDENHAIN TNC 415 (259 9x0) Service Manual - Manual (Page 109)

SERVICE MANUAL TNC 415B/425
Page 104
Issue: 20.08.95
NOTE:
The TNC only displays the external directory in the FE1 mode.
As of NC software 259 93x.08 and 259 94x.08 the compensation values and axis relations can be stored as
files with the extensions .COM and .CMA.
Press Key Function
MOD
8 0 7 6 6 7 ENT
EXT
MOD
TNC in operating mode PROGRAMMING AND EDITING
Prepare TNC for entry of code number
Enter code number and confirm with ENT
Activate data transfer menu
Here the PLC editor can be assigned to an interface
Press arrow key to select the TNC directory
Soft key and arrow key on VDU
List .COM
Read out .COM
Soft key and arrow key on VDU
List .CMA
Read out NAME>.CMA
*
If no .CMA file is defined and multipoint axis error compensation selected via MP730, the
compensation value tables of the code number 105296 are valid.