HEIDENHAIN TNC 415 (259 9x0) Service Manual - Manual (Page 131)

SERVICE MANUAL TNC 415B/425
Page 126
Issue: 20.08.95
18.5 Offset Adjustment
18.5.1 Axes with Analogue Speed Controller
a) Offset Adjustment with Code Number
Press Key Function
MOD
7 5 3 6 8
ENT
TNC in operating mode PROGRAMMING AND EDITING
Prepare TNC for entry of code number
Enter code number for offset adjustment and confirm with ENT
Now the contents of the offset memory is displayed on the screen in converter steps (1 conv. step = 0.153 mV).
From left to right: X, Y, Z, IV, V.
Offset compensation is executed
Offset is not executed or is cancelled
*
The offset adjustment with code number only compensates the current offset. Subsequent offset
modifications are not compensated.