HEIDENHAIN TNC 415 (259 9x0) Service Manual User Manual
Page 113
SERVICE MANUAL TNC 415B/425
Page 108
Issue: 20.08.95
17.3.6 Output of Files from PLC Memory
NOTE:
The TNC only displays the external directory in the FE1 mode.
Overview of the Files
PLC programs
Error messages
1. language
Error messages
English
Dialogues 1.
language
Dialogues English
ASCII files
Help texts
Files for axis error compensation
Files for axis error compensation
.PLC
.ER1
1)
.ERE
1)
.DI1
1)
.DIE
1)
.A
1)
.HLP
.COM
2)
.CMA
2)
1)
Note:
The error messages, dialogues and ASCII files are output as ASCII files with the extension .A.
Therefore, the files to be output must have different filenames so that they will not be overwritten
on the external data medium.
(to rename a files, press the soft key
.)
Note down filename and the extension!
After having downloaded the files, the extension .A must be reconverted to the original extension
by pressing the soft key
.
2)
*
There may be several files with the same extension in RAM.
Note down status information (see section 17.2).